Showing 33–48 of 309 results
A highly-sensitive oil-based magnetic particle aerosol for nonfluorescent (visible) wet method magnetic particle testing to locate fine and medium discontinuities on finished parts.
7HF provides clear, strong indications due to the heavy buildup of the highly magnetic particles.
The A-Series magnetic benches provide Alternating Current magnetization for finding surface defects during wet method magnetic particle inspection. The two outputs are independently adjustable to set each magnetic field, circular or longitudinal.
AGFA film developing chemicals are a reliable, high quality solution for radiographic film processing in industrial radiography applications. With a combination of benefits, key features and advantages, these chemistries ensure accurate results, clear images and efficient film handling.
As a leading solution for corrosion assessments and precise thickness measurements, the Sonatest AlphaGage+ instrument employs advanced technologies tailored to different industry needs.
Ultrasonic touch probes.
Ultrasonic transducers with angled beams are recommended for parts with inclined defects, such as welds, and are sometimes used in mechanized or automated testing. They use refraction to transmit shear or longitudinal waves at a predetermined angle, whereas most standard transducers generate shear waves by mode conversion. The elements are mounted in integral or replaceable pads that require a coupling layer, usually gel, oil or paste.
Our angle beam probes are available in single and dual element configurations and in a variety of sizes.
ASME SEC V UT CALIBRATION BLOCK (3/4” THICK)
The Asme Sec V ¾ block is used for obtaining primary reference responses in ultrasonic inspection of primary reference welds in ultrasonic inspection of welds. The calibration block is manufactured with 1 laterally drilled hole on one face (at 3/32“ diameter, 1.75” deep, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 3/32“ diameter, 1.75” deep, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized 2%T deep x 1/8“ wide x 1-3/8” long.
Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
Dimensions: 0.75“ (H) X 6.25” (L) X 6.0” (W)
Weight: 7.985 LBS
Material: 1018 STEEL, NICKEL PLATED
Specifications: ASME SEC V, ART 4, FIG. T-434.2.1
ASME SEC V UT CALIBRATION BLOCK (1-1/2″ THICK)
The Asme Sec V 1-1/2 block is used to obtain primary reference responses in ultrasonic inspection of primary reference welds in ultrasonic inspection of welds. The calibration block is manufactured with 1 laterally drilled hole on one face (at 1/8″ diameter, 1.75″ depth, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 1/8″ diameter, 1.75″ depth, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized 2%T deep x 1/8″ wide x 1-3/8″ long. Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
BLOQUE DE CALIBRACIÓN ASME SEC V UT (3/4″ DE ESPESOR)
El bloque Asme Sec V ¾ se utiliza para la obtención de respuestas de referencia primarias en la inspección ultrasónica de soldaduras. El bloque de calibración está hecho con 1 orificio perforado lateralmente en una cara (a 3/32″ de diámetro, 1,75″ de profundidad, situado a través del espesor a 1/2T), 2 orificios perforados lateralmente en la cara opuesta (a 3/32″ de diámetro, 1. 75″ de profundidad, situados a través del espesor a ¼ y 3/4T), 2 muescas EDM en las caras superior e inferior, ambas dimensionadas a 2%T de profundidad x 1/8″ de ancho x 1-3/8″ de largo.
Personalización disponible si es necesario para muescas y orificios. El bloque de referencia se fabrica de acuerdo con ASME Sec V Art. 4 Fig. T-434.2.1.
Características
Dimensiones: 0.75″ (H) X 6.25″ (L) X 6.0″ (W)
Peso: 8.117 LBS
Material: ACERO INOXIDABLE 304
Especificaciones: ASME SEC V, ART 4, FIG. T-434.2.1
ASME SEC V UT CALIBRATION BLOCK (1-1/2″ THICK)
The Asme Sec V 1-1/2 block is used to obtain primary reference responses in ultrasonic inspection of primary reference welds in ultrasonic inspection of welds. The calibration block is manufactured with 1 laterally drilled hole on one face (at 1/8″ diameter, 1.75″ depth, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 1/8″ diameter, 1.75″ depth, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized 2%T deep x 1/8″ wide x 1-3/8″ long. Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
ASME SEC V UT CALIBRATION BLOCK (3/4″ THICK)
The Asme Sec V ¾ block is used for obtaining primary reference responses in ultrasonic inspection of welds. The calibration block is made with 1 laterally drilled hole on one face (at 3/32″ diameter, 1.75″ deep, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 3/32″ diameter, 1. 75″ deep, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized at 2%T deep x 1/8″ wide x 1-3/8″ long.
Customization available if needed for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
ASME SEC V UT Calibration Block (1-1/2″ thick).
The Asme Sec V 1-1/2 block is used for obtaining primary reference responses in ultrasonic inspection of welds.
The calibration block is manufactured with 1 laterally drilled hole on one face (at 1/8″ diameter, 1.75″ deep, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 1/8″ diameter, 1.75″ deep, located through the thickness at ¼ & 3/4T), 2 EDM notches on the top and bottom faces, both sized at 2″ deep x 1/” wide x 1-3/8″ long.
Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
BLOQUE DE CALIBRACIÓN ASME SEC V UT (3/4″ DE ESPESOR)
El bloque Asme Sec V ¾ se utiliza para la obtención de respuestas de referencia primarias en la inspección ultrasónica de soldaduras. El bloque de calibración está hecho con 1 orificio perforado lateralmente en una cara (a 3/32″ de diámetro, 1,75″ de profundidad, situado a través del espesor a 1/2T), 2 orificios perforados lateralmente en la cara opuesta (a 3/32″ de diámetro, 1. 75″ de profundidad, situados a través del espesor a ¼ y 3/4T), 2 muescas EDM en las caras superior e inferior, ambas dimensionadas a 2%T de profundidad x 1/8″ de ancho x 1-3/8″ de largo.
Personalización disponible si es necesario para muescas y orificios. El bloque de referencia se fabrica de acuerdo con ASME Sec V Art. 4 Fig. T-434.2.1.
Características
Dimensiones: 0.75″ (H) X 6.25″ (L) X 6.0″ (W)
Peso: 8.117 LBS
Material: 7075-T6 ALUMINUM
Especificaciones: ASME SEC V, ART 4, FIG. T-434.2.1
ASME SEC V UT CALIBRATION BLOCK (1-1/2″ THICK)
The Asme Sec V 1-1/2 block is used for obtaining primary reference responses in ultrasonic inspection of welds. The calibration block is manufactured with 1 side drilled hole on one face (at 1/8″ diameter, 1.75″ deep, located through the thickness at 1/2T), 2 side drilled holes on the opposite face (at 1/8″ diameter, 1.75″ deep, located through the thickness at ¼ & 3/4T), 2 EDM notches on the top and bottom faces, both sized at 2%T deep x 1/8″ wide x 1-3/8″ long.
Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
AWS RESOLUTION UT CALIBRATION BLOCK
The AWS Resolution Block (RC Block) is used to check the resolution capability of angle beam transducers. With 3 sets of 3 through holes of 1.59 mm (0.0626″) diameter for 45°, 60° and 70°, the block is manufactured in accordance with AWS Welding Highway and Railway Bridges Specification D2.0, and ANSI/AWS D1.1 Structural Welding Code.
Features
AWS RESOLUTION UT CALIBRATION BLOCK
The AWS resolution block (RC block) is used to check the resolution capability of angle beam transducers. With 3 sets of 3 through holes of 1.59 mm (0.0626â⒬Â) diameter for 45°, 60° and 70°, the block is manufactured in accordance with AWS Welding Highway and Railway Bridges Specification D2.0, and ANSI/AWS D1.1 Structural Welding Code.
Features