Showing 17–32 of 309 results
The 4-step block is used to gauge thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20mmx20mm. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer the possibility of customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 5-step block is used for thickness and linearity calibration. The steps are 0.500″, 0.400″, 0.300″, 0.200″ and 0.100″ thick, and each step face measures 0.750″ x 0.750″. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 5-step block is used to calibrate thickness and linearity. The steps are 0.500″, 0.400″, 0.300″, 0.200″ and 0.100″ thick, and each step face measures 0.750 “x0.750”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Dimensions: 0.5″ (height) X 3.75″ (length) X 0.75″ (width)
Weight: 0.234 LBS
Material: 2101 Duplex Stainless Steel
Specifications: ASTM E797
The 5-step block is used to calibrate thickness and linearity. The steps are 0.500″, 0.400″, 0.300″, 0.200″ and 0.100″ thick, and each step face measures 0.750 “x0.750”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 5-step block is used to calibrate thickness and linearity. The steps are 0.500″, 0.400″, 0.300″, 0.200″ and 0.100″ thick and each step face measures 0.750 “x0.750”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
El bloque de 5 escalones se utiliza para la calibración de espesor y linealidad. Los escalones tienen un grosor de 2,5 mm, 5,0 mm, 7,5 mm, 10,0 mm y 12,5 mm, y cada cara del escalón mide 20 mm x 20 mm. El bloque se fabrica de acuerdo con la norma ASTM E797. Si es necesario, ofrecemos la posibilidad de personalizarlo para escalones adicionales y de mayor tamaño.
UT 5-STEP CALIBRATION BLOCK.
The 5-step block is used for thickness and linearity calibration. The steps are 2.0 mm, 4.0 mm, 6.0 mm, 8.0 mm and 10.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger step sizes.
Features:
The 5-step block is used to calibrate thickness and linearity. The steps are 2.0 mm, 4.0 mm, 6.0 mm, 8.0 mm and 10.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger step sizes.
Features
The 5-step block is used to calibrate thickness and linearity. The steps are 2.0 mm, 4.0 mm, 6.0 mm, 8.0 mm and 10.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger step sizes.
Features
7C Black is a highly-sensitive magnetic particle powder for nonfluorescent (visible) wet method magnetic particle testing. Particle suspensions prepared with 7C Black provide clear, strong indications and are ideal for locating fine and medium discontinuities on finished parts.