Showing 209–224 of 309 results
Setting standards of performance and reliability
The new Sonatest RailScan 125+ flaw detector delivers a higher level of nearsurface resolution and penetrating power into a portable and rugged enclosure. It also offers more measuring capabilities than its predecessors for rail applications such as:
Phased Array Ultrasonic Inspection Device.
Our RotoArray phased array inspection device gives you faster, more reliable A, B and C-scan imaging with the portability of a handheld probe and performance that rivals that of a full-immersion C-scan system. Easy to use, flexible and rugged, it is designed to simplify ultrasonic inspections, today and in the future.
Ultrasonic Non-Destructive Testing (NDT) has helped engineers inspect composites and metallic structures across all industries for years. Whether it be traditional aluminium laminates, steel pipelines, pressure vessel shells or today’s more complex carbon fibre-based composites, ultrasonic NDT technology has the ability to inspect these parts and create complete inspection maps showing attachment locations, defects and wall losses. Comprehensive integrity reports can be generated, supported by imaging reports and CSV file exporting, data review is simple and repeatable.
Active with key industry leaders for more than 60 years, Sonatest is proud to present the RSflite linear scanning instrument.
Waygate Technologies’ radiography tubes are the industry’s preferred choice for industrial inspection applications. With a combination of power, accuracy and reliability, these tubes offer an advanced solution for defect detection and image quality in industrial radiography.
Waygate Technologies’ Seifert ISOVOLT Titan|neo Series radiography tubes are an industry-leading solution for industrial radiography applications. Designed with the most advanced technology, these tubes offer a combination of power, versatility and image quality, improving efficiency and accuracy in defect inspection.
Magnaflux understands some parts will not lend themselves to traditional units. Some of these parts are too large, some need special handling, and some are better processed dry. The CSV-Series offers a solution to the parts that are too large for normal systems.
Magnaflux demagnetization units remove residual magnetism remaining after conducting Magnetic Particle Inspection. The upgraded design allows users to run the coil continuously, without a duty cycle cool down period or a hot coil.
Single-phase MIG or DC multiprocess capability for versatility with outstanding arc performance in CV mode (MIG) and CC mode (Stick and TIG).
The Sitescan 500s offers the end user an entry level broad band flaw detector with full VGA display, sync and proportional outputs and a 50nS (Spike) 200V Pulser.
Typical applications are Weld Fabrication, Corrosion Detection, Forgings & Castings and general UT inspection.
The Sitescan D-50 offers the end user an entry level broadband flaw detector in the popular and portable casing of the established D-Series; with a full VGA display, a 50nS (Spike) 200V, a Pulser 0.5dB gain resolution and an optional rubber boot.
Typical applications are Weld Fabrication, Corrosion Detection, Forgings & Castings and general UT inspection.
SKC-S is an NDT-approved solvent cleaner/remover for pre-cleaning before non-destructive testing and for removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing.
This non-halogenated solvent remover can be used on a wide range of substrates to remove oils, greases and other contaminants. SKC-S dries quickly without leaving a residue, and meets the low-residue requirements for NDT and aerospace penetrant testing.
Specially designed for chemically sensitive plastic parts, and for leak detection, SKL-4C is a red dye visible penetrant that is water based and water washable. As with most plastic parts, it is recommended that a trial application be used to confirm compatibility.
SKL-SP2 is a solvent removable visible red dye penetrant. SKL-SP2 locates surface-breaking discontinuities with a simple three-step process that is ideal for basic industrial nondestructive testing. SKL-SP2 features high-performance penetrating characteristics and produces clear vivid red indications.
Solid Shaft Machined Testers
Speed up your shaft inspections with our Solid Shaft Machined Testers (SAMT). Designed for integration with the powerful Mentor UT phased array platform, more efficient and reliable A-scans are now possible.