Millermatic 350P 200/230/460V
First single- or three-phase power Millermatic that welds material from 22 gauge to 1/2 in thick in a single pass. Perfect for fabrication, manufacturing, maintenance and repair.
Shop
Showing 177–192 of 309 results
-
-
Millermatic® 190 MIG Welder
Welds 24 gauge – 5/16 in. (0.8-7.9mm) mild steel. Uses 240V input power.
-
Millermatic® 212 Auto-Set™ MIG Welder
All-in-one wire welder that welds material from 22 gauge to 3/8 in. thick, in a single pass. The Millermatic 212 Auto-Set MIG welder is Miller’s mid-level 220-volt wire welder. It will weld material from 22 gauge all the way up to 3/8 in (9.5 mm). This welding machine is great for light fabrication work, machine hobbyists, garage and body shops, and farms and ranches.
-
Modular Penetrant Testing Equipment
Magnaflux’s modular penetrant equipment design makes it simple and cost-effective to build the right equipment for every process, including water wash, lipophilic and hydrophilic LPI testing, while also conforming easily to fit the required work flow and available floor space with straight line, U-shaped and L-shaped designs.
-
Multi-element transducers / Transducers
Krautkramer ultrasonic probes and transducers.
We manufacture a wide variety of multi-element ultrasonic probes and transducers with a high degree of reliability for numerous applications. Eliminate the need for multiple inspections with the focus and fixed-angle options available, and reduce setup and scanning times with our delay-line or immersion probes for large-area scanning.
-
MV-740
Water-Based Visible Magnetic Particle Suspension
A highly-sensitive water-based magnetic particle fluid for non-fluorescent (visible) wet method magnetic particle testing to locate fine and medium discontinuities on finished parts. MV-740 provides clear, strong indications due to the heavy buildup of the highly magnetic particles. The product is ready-to-use, so no dilution is required.
MV-740 is often used with WCP-2 white contrast paint to improve contrast and inspection sensitivity.
-
NDT Light Meters
The Visible Light Meter accurately measures visible light in both foot-candles per and lux and includes a permanently attached visible light sensor, specially designed to measure visible white light in the 400-760 nm range for non-destructive testing.
-
NiCr Test Panels
For Liquid Penetrant Testing NDT
NiCr test pieces for liquid penetrant inspection will help you maintain your PT testing process by verifying penetrant sensitivity and performance. Use to check for penetrant deterioration, to compare different penetrants or to verify sensitivity or visibility. NiCr Test Panels are ideal penetrant sensitivity comparators. They come in pairs, with panel set crack depths available in 20 microns.
-
-
PA-2491-1018
E2491 PHASED ARRAY CALIBRATION BLOCK (IMPERIAL)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.
Features:
- Dimensions: 4″ (height) X 6″ (length) X 1″ (width).
- Weight: 6,773 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASTM E2491
-
PA-2491-304
E2491 PHASED ARRAY CALIBRATION BLOCK (IMPERIAL)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.
Features:
- Dimensions: 4″ (height) X 6″ (length) X 1″ (width).
- Weight: 6,885 LBS
- Material: STAINLESS STEEL 304
- Specifications: ASTM E2491
-
PA-2491-7075
E2491 PHASED ARRAY CALIBRATION BLOCK (IMPERIAL)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.
Features:
- Dimensions: 4″ (height) X 6″ (length) X 1″ (width).
- Weight: 2,418 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E2491
-
PA-2491-M-1018
E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.
Features:
- Dimensions: 3.937″ (H) X 5.906″ (L) X 0.984″ (W).
- Weight: 6.459 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASTM E2491
-
PA-2491-M-304
E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam capacity and beam direction. Manufactured in accordance with ASTM E2491.
Features:
- Dimensions: 3.937″ (H) X 5.906″ (L) X 0.984″ (W).
- Weight: 6.565 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E2491
-
PA-2491-M-7075
E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam capacity and beam direction. Manufactured in accordance with ASTM E2491.
Features:
- Dimensions: 3.937″ (H) X 5.906″ (L) X 0.984″ (W).
- Weight: 2.306 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E2491
-
PA-IIW-1018
PHASED ARRAY CALIBRATION BLOCK TYPE A (IMPERIAL)
The Phased Array Type A block has the following Phased Array applications described:
Beam angle verification.
Sensitivity calibration.
Wedge delay calibration.
DAC/TCG and more.
Features:
- Dimensions: 4″ (height) X 12″ (length) X 1″ (width).
- Weight: 12,072 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASTM E 164 FIG. A1.1