Shop

  • Magnetic Particle Test Pieces

    Magnetic Particle Test Pieces

    Dispositivos de Evaluación de Rendimiento de Partículas Magnéticas.

    Estas piezas de ensayo para la inspección por partículas magnéticas le ayudarán a mantener el proceso de prueba por partículas magnéticas ya que verifican el rendimiento de la partícula magnética. Utilícelas para comprobar el deterioro de las partículas magnéticas, comparar diferentes polvos magnéticos, verificar la sensibilidad o visibilidad o asegurar la dirección y la fuerza del campo.

  • MARE-1018

    MARE-1018

    NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)

    The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.


    Features:

    • Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
    • Weight: 12,791 LBS
    • Material: 1018 STEEL, NICKEL PLATED
    • Specs: t9074-AS-GIB-010/271-ACN1
  • MARE-304

    MARE-304

    NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)

    The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.


    Features:

    • Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
    • Weight: 13.002 LBS
    • Material: STAINLESS STEEL 304
    • Especificaciones: t9074-AS-GIB-010/271-ACN1
  • MARE-7075

    MARE-7075

    NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)

    The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.


    Features:

    • Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
    • Weight: 4,567 LBS
    • Material: 7075-T6 ALUMINIUM}
    • Especificaciones: t9074-AS-GIB-010/271-ACN1
  • Masterscan 700M, ultrasonic flaw detector, advanced NDT equipment, ultrasonic inspection, non-destructive testing, portable ultrasound, material analysis, structural integrity assessment, weld inspection, ultrasonic thickness measurement, high-precision ultrasonic technology, crack detection, industrial ultrasonic equipment, solutions for non-destructive testing, advanced ultrasonic analysis, defect detection in materials, next-generation ultrasonic equipment, corrosion evaluation, ultrasonic quality inspection, advanced NDT technology.

    Masterscan 700m

    The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square Pulser.

    Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.

    Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.

  • Masterscan D-70, portable ultrasonic equipment, ultrasonic flaw detector, NDT (non-destructive testing), advanced ultrasonic inspection, material analysis, structural integrity assessment, industrial ultrasonic testing, crack detection, ultrasonic thickness measurement, high-precision ultrasonic technology, weld inspection, solutions for non-destructive testing, next-generation ultrasonic equipment, defect analysis in materials, advanced NDT technology, corrosion evaluation, ultrasonic quality inspection, portable NDT equipment, flaw detection in materials.

    Masterscan D-70

    The Masterscan D-70 offers the inspector a fully capable and functional set of tools and software for inspection across all applications. Capabilities include encoded B-Scan, Advanced Thickness logging and Dryscan capability in a portable enclosure.

    Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ration are key functions in the Masterscan range.

    Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings and Castings, Power Generation (including EMATS) and general UT inspection.

  • Maxstar® 150 S 120-240 V

    Maxstar® 150 S 120-240 V

    Best-of-class – provides maximum portability and performance in most compact Stick package in the industry. Packs dependability and performance all in one machine.

  • Maxstar® 150 STH 120-240 V

    Maxstar® 150 STH 120-240 V

  • MD-Series

    MD-Series

    Multi-Directional Magnetic Wet Benches for AC, HWDC or 1-Phase FWDC Magnetization

    The MD-Series multi-directional magnetic bench offers Alternating Current, Half Wave Direct Current and 1-phase Full Wave Direct Current for time-saving multidirectional magnetization which can find defects in all orientations with one mag-cycle.

  • Mentor UT

    Mentor UT

    Accurate and intuitive UT flaw detector system

    Mentor UT offers a new kind of inspection experience by combining outstanding UT performance, customizable workflow applications and user interfaces, and intuitive hardware with embedded expertise—making inspections more accessible and efficient.

  • Meters

    Meters

    For Magnetic Particle Inspection

    This line of mag particle testing meters will help you check and measure the performance of your magnetic bench, electromagnetic current generator or other magnetizing equipment as part of your regular system performance checks.

    Find out more about each of our mag particle testing meters by clicking on the tabs below, or contact us for help choosing the right field indicator for your application.

  • MFL-FS-A36-1-M

    MFL-FS-A36-1-M

  • MG-410

    MG-410

    Fluorescent Magnetic Particles

    MG-410 is an ultra-bright fluorescent magnetic particle powder for locating small, medium, and large discontinuities. These particles provide clear, ultra-bright, fluorescent green indications under UV light with minimal background. MG-410 is designed for use in water or oil baths for wet method fluorescent magnetic particle testing.

  • MG-450A

    MG-450A

    Fluorescent Magnetic Particle Premix

    MG-450A is a borax-free ultra-high fluorescence magnetic particle premix for locating small, medium and gross discontinuities in high-volume applications using wet method magnetic particle testing.

    Designed to mix with water, MG-450A improves indication visibility with less background fluorescence because of the high-strength, high-fluorescent MG-410 particles.

  • Microgage III, ultrasonic thickness gauge, portable thickness measurement, NDT equipment, non-destructive testing, ultrasonic testing, material thickness measurement, corrosion detection, industrial ultrasound, precision thickness gauge, wall thickness measurement, ultrasonic technology, portable NDT device, structural integrity assessment, ultrasonic inspection, metal thickness measurement, pipeline thickness testing, NDT for material evaluation, ultrasonic thickness testing, advanced thickness gauge.

    Microgage III

    All instruments in the Mocrogage III range are field upgradeable, allowing the operator to opt for further features further down the line, without returning the instrument to the factory.

    The variety of features offered by the Microgage III series allows the user to select a quality tool that will exceed their application needs. The Echo-to-Echo capability allows measurement of the thickness of materials without removing paint or coatings.

    Designed with the user in mind, the Microgage III utilises state- of-the-art digital technology to produce fast accurate readings. Available in 7 models including basic (B, datalogging (DL), with and without waveform (W) and with monochrome or colour (C) displays.

  • Millermatic 211

    Millermatic 211

    The Millermatic® 211 MIG welder with Advanced Auto-Set™ is a multi-voltage, 230 amp portable MIG welder that runs on both 120 volt and 240 volt input power. The inverter design of the Millermatic 211 means it draws less power, has a superior welding arc and weighs up to 40% less than other MIG welders in its class. Welds material from 24-gauge to 3/8 in thick in a single pass.