Ultrasound

  • Microgage III, ultrasonic thickness gauge, portable thickness measurement, NDT equipment, non-destructive testing, ultrasonic testing, material thickness measurement, corrosion detection, industrial ultrasound, precision thickness gauge, wall thickness measurement, ultrasonic technology, portable NDT device, structural integrity assessment, ultrasonic inspection, metal thickness measurement, pipeline thickness testing, NDT for material evaluation, ultrasonic thickness testing, advanced thickness gauge.

    Microgage III

    All instruments in the Mocrogage III range are field upgradeable, allowing the operator to opt for further features further down the line, without returning the instrument to the factory.

    The variety of features offered by the Microgage III series allows the user to select a quality tool that will exceed their application needs. The Echo-to-Echo capability allows measurement of the thickness of materials without removing paint or coatings.

    Designed with the user in mind, the Microgage III utilises state- of-the-art digital technology to produce fast accurate readings. Available in 7 models including basic (B, datalogging (DL), with and without waveform (W) and with monochrome or colour (C) displays.

    Read moreDone
  • Multi-element transducers / Transducers

    Multi-element transducers / Transducers

    Krautkramer ultrasonic probes and transducers.

    We manufacture a wide variety of multi-element ultrasonic probes and transducers with a high degree of reliability for numerous applications. Eliminate the need for multiple inspections with the focus and fixed-angle options available, and reduce setup and scanning times with our delay-line or immersion probes for large-area scanning.

    Read moreDone
  • PA-2491-1018

    PA-2491-1018

    E2491 PHASED ARRAY CALIBRATION BLOCK (IMPERIAL)

    Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.

    Features:

    • Dimensions: 4″ (height) X 6″ (length) X 1″ (width).
    • Weight: 6,773 LBS
    • Material: 1018 STEEL, NICKEL PLATED
    • Specifications: ASTM E2491
    Read moreDone
  • PA-2491-304

    PA-2491-304

    E2491 PHASED ARRAY CALIBRATION BLOCK (IMPERIAL)

    Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.

    Features:

    • Dimensions: 4″ (height) X 6″ (length) X 1″ (width).
    • Weight: 6,885 LBS
    • Material: STAINLESS STEEL 304
    • Specifications: ASTM E2491
    Read moreDone
  • PA-2491-7075

    PA-2491-7075

    E2491 PHASED ARRAY CALIBRATION BLOCK (IMPERIAL)

    Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.

    Features:

    • Dimensions: 4″ (height) X 6″ (length) X 1″ (width).
    • Weight: 2,418 LBS
    • Material: 7075-T6 ALUMINIUM
    • Specifications: ASTM E2491
    Read moreDone
  • PA-2491-M-1018

    PA-2491-M-1018

    E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)

    Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.

    Features:

    • Dimensions: 3.937″ (H) X 5.906″ (L) X 0.984″ (W).
    • Weight: 6.459 LBS
    • Material: 1018 STEEL, NICKEL PLATED
    • Specifications: ASTM E2491
    Read moreDone
  • PA-2491-M-304

    PA-2491-M-304

    E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)

    Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam capacity and beam direction. Manufactured in accordance with ASTM E2491.

    Features:

    • Dimensions: 3.937″ (H) X 5.906″ (L) X 0.984″ (W).
    • Weight: 6.565 LBS
    • Material: 304 STAINLESS STEEL
    • Specifications: ASTM E2491
    Read moreDone
  • PA-2491-M-7075

    PA-2491-M-7075

    E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)

    Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam capacity and beam direction. Manufactured in accordance with ASTM E2491.

    Features:

    • Dimensions: 3.937″ (H) X 5.906″ (L) X 0.984″ (W).
    • Weight: 2.306 LBS
    • Material: 7075-T6 ALUMINIUM
    • Specifications: ASTM E2491
    Read moreDone
  • PA-IIW-1018

    PA-IIW-1018

    PHASED ARRAY CALIBRATION BLOCK TYPE A (IMPERIAL)

    The Phased Array Type A block has the following Phased Array applications described:

    Beam angle verification.
    Sensitivity calibration.
    Wedge delay calibration.
    DAC/TCG and more.

    Features:

    • Dimensions: 4″ (height) X 12″ (length) X 1″ (width).
    • Weight: 12,072 LBS
    • Material: 1018 STEEL, NICKEL PLATED
    • Specifications: ASTM E 164 FIG. A1.1
    Read moreDone
  • PA-IIW-304

    PA-IIW-304

    Read moreDone
  • PA-IIW-7075

    PA-IIW-7075

    PHASED ARRAY CALIBRATION BLOCK TYPE A (IMPERIAL)

    The Phased Array Type A block has the following Phased Array applications described:

    Beam angle verification.
    Sensitivity calibration.
    Wedge delay calibration.
    DAC/TCG and more.

    Features:

    • Dimensions: 4″ (height) X 12″ (length) X 1″ (width).
    • Weight: 4,310 LBS
    • Material: 7075-T6 ALUMINUM
    • Specifications: ASTM E 164 FIG. A1.1
    Read moreDone
  • PA-IIW-M-1018

    PA-IIW-M-1018

    PHASED ARRAY CALIBRATION BLOCK TYPE A (METRIC VERSION)

    The Phased Array block type A (metric version) has the following Phased Array applications described:

    Beam angle verification.
    Sensitivity calibration.
    Wedge delay calibration.
    DAC/TCG and more.

    Features:

    • Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W).
    • Weight: 11.701 LBS
    • Material: 1018 STEEL, NICKEL PLATED
    • Specifications: ASTM E 164 FIG. A1.1
    Read moreDone
  • PA-IIW-M-304

    PA-IIW-M-304

    PHASED ARRAY CALIBRATION BLOCK TYPE A (METRIC VERSION)

    The Phased Array block type A (metric version) has the following Phased Array applications described:

    Beam angle verification.
    Sensitivity calibration.
    Wedge delay calibration.
    DAC/TCG and more.

    Features:

    • Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W).
    • Weight: 11.894 LBS
    • Material: 304 STAINLESS STEEL
    • Specifications: ASTM E 164 FIG. A1.1
    Read moreDone
  • PA-IIW-M-7075

    PA-IIW-M-7075

    PHASED ARRAY CALIBRATION BLOCK TYPE A (METRIC VERSION)

    The Phased Array block type A (metric version) has the following Phased Array applications described:

    Beam angle verification.
    Sensitivity calibration.
    Wedge delay calibration.
    DAC/TCG and more.

    Features:

    • Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W).
    • Weight: 4.178 LBS
    • Material: 7075-T6 ALUMINIUM
    • Specifications: ASTM E 164 FIG. A1.1
    Read moreDone
  • PALM Flat Scanner

    PALM Flat Scanner

    A versatile and ergonomic UT inspection tool

    The PALM Flat Scanner (PALM Flat Scanner), part of the PALM scanner family, is a versatile and ergonomic UT inspection tool that features an integrated encoder and magnetic wheels to allow vertical and overhead use. The scanner can be used on diameters greater than 90 mm for circumferential scanning and 200 mm for axial scanning.

    Read moreDone
  • PALM Scanner

    PALM Scanner

    Máquina de ultrasonido portátil de mano

     
    Evaluación de soldadura de tuberías de pequeño diámetro y difícil acceso.
     
    La familia de escáneres PALM inspecciona tuberías con diámetros desde 1,5” hasta 3,5”. Las herramientas se pueden adaptar con varias cuñas y sondas de matriz en fase para adaptarse a cualquier procedimiento de inspección independientemente del espesor del tubo, el material o los criterios de aceptación.

    Read moreDone