Ultrasound Testing (UT)

  • Krautkrämer SpotVision

    Krautkrämer SpotVision

    Phased Array Inspection of Spot Welds.

    With the increase in vehicle production, the automotive industry is turning to image-based inspection to reduce downtime while maintaining high quality standards.

    Read moreDone
  • Krautkrämer USM 100 (Flaw Detector)

    Krautkrämer USM 100 (Flaw Detector)

    The new standard in flaw detection. Now also available with the industry-leading features of the Pro edition

    Sleek but rugged, the Krautkrämer USM 100 is a portable, highly versatile flaw detector with smartphone-like capabilities. Designed ergonomically for unrivaled ease of use, it features a large touch screen and buttons that allow seamless ambidextrous operation. Digital features include a best-in-class user interface that streamlines setup, training time and updates.

    Read moreDone
  • LEMO-00 to LEMO-00

    LEMO-00 to LEMO-00

    Ultrasonic cable (UT) DUAL BNC to DUAL MICRODOT, High Tech Supplies brand.

    Custom cable manufacturing and customization upon request.

    Made in the USA.

    CUSTOM CABLES CAN ALSO BE MANUFACTURED AS PER REQUEST (MINIMUM QTY REQUIRED).

    Read moreDone
  • LEMO-00 to LEMO-1

    LEMO-00 to LEMO-1

    Ultrasonic cable (UT) LEMO-00 to LEMO-1, High Tech Supplies brand.

    Custom cable manufacturing and customization upon request.

    Made in USA.

    Read moreDone
  • LEMO-00 to MICRODOT

    LEMO-00 to MICRODOT

    Ultrasound cable (UT) LEMO-00 to MICRODOT, High Tech Supplies brand.

    Custom cable manufacturing and customization upon request.

    Made in USA.

    Read moreDone
  • MAB-1018

    MAB-1018

    MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)

    The Mini Angle Beam (Mini Angle Beam or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured to ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 2″/50mm radius, a 1″/25mm opposing radius and a flat bottom hole 1.0780″/2mm in diameter and 0.75″/18.75mm deep.

    Features:

    • Dimensions: 1.732″ (H) X 3″ (L) X 1″ (W).
    • Weight: 0.989 LBS
    • Material: 1018 STEEL, NICKEL PLATED
    • Specifications: ASTM E 164 FIG. A1.12.
    Read moreDone
  • MAB-304

    MAB-304

    MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)

    MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)

    The Mini Angle Beam (Mini Angle Beam or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured to ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 2″/50mm radius, a 1″/25mm opposing radius and a flat bottom hole 1.0780″/2mm in diameter and 0.75″/18.75mm deep.

    Features:

    • Dimensions: 1.732″ (H) X 3″ (L) X 1″ (W).
    • Weight: 1.006 LBS
    • Material: STAINLESS STEEL 304
    • Specifications: ASTM E 164 FIG. A1.12.
    Read moreDone
  • MAB-7075

    MAB-7075

    MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)

    The Mini Angle Beam (Mini Angle Beam or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured to ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 2″/50mm radius, a 1″/25mm opposing radius and a flat bottom hole 1.0780″/2mm in diameter and 0.75″/18.75mm deep.

    Features:

    • Dimensions: 1.732″ (H) X 3″ (L) X 1″ (W).
    • Weight: 0.353 LBS
    • Material: 7075-T6 ALUMINIUM
    • Specifications: ASTM E 164 FIG. A1.12.
    Read moreDone
  • MAB-M-1018

    MAB-M-1018

    MINI ANGLE CALIBRATION BLOCK FOR ULTRASOUND (METRIC)

    The Mini Angle Beam Block (Angle Beam Block or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured in accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 50 mm radius, a 25 mm opposing radius and a 2 mm diameter, 18.75 mm deep flat bottom hole.

    Features

    • Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width)
    • Weight: 0.943 LBS
    • Material: 1018 STEEL, NICKEL PLATED.
    • Specifications: ASTM E 164 FIG. A1.12.
    Read moreDone
  • MAB-M-304

    MAB-M-304

    MINI ANGLE BEAM UT CALIBRATION BLOCK (METRIC)

    The Mini Angle Beam (Mini Angle Beam) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured in accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 50 mm radius, a 25 mm opposing radius, and a 2 mm diameter, 18.75 mm deep flat bottom hole.

    Features:

    • Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
    • Weight: 0.959 LBS
    • Material: 304 STAINLESS STEEL
    • Specifications: ASTM E 164 FIG. A1.12.
    Read moreDone
  • MAB-M-7075

    MAB-M-7075

    MINI ANGLE BEAM UT CALIBRATION BLOCK (METRIC)

    The Mini Angle Beam Block (Angle Beam Block or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured in accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 50 mm radius, a 25 mm opposing radius, and a 2 mm diameter, 18.75 mm deep flat bottom hole.

    Features:

    • Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
    • Weight: 0.337 LBS
    • Material: 7075-T6 ALUMINIUM
    • Specifications: ASTM E 164 FIG. A1.12.
    Read moreDone
  • MARE-1018

    MARE-1018

    NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)

    The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.

    Features:

    • Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
    • Weight: 12,791 LBS
    • Material: 1018 STEEL, NICKEL PLATED
    • Specs: t9074-AS-GIB-010/271-ACN1
    Read moreDone
  • MARE-304

    MARE-304

    NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)

    The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.

    Features:

    • Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
    • Weight: 13.002 LBS
    • Material: STAINLESS STEEL 304
    • Especificaciones: t9074-AS-GIB-010/271-ACN1
    Read moreDone
  • MARE-7075

    MARE-7075

    NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)

    The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.

    Features:

    • Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
    • Weight: 4,567 LBS
    • Material: 7075-T6 ALUMINIUM}
    • Especificaciones: t9074-AS-GIB-010/271-ACN1
    Read moreDone
  • Masterscan 700M, ultrasonic flaw detector, advanced NDT equipment, ultrasonic inspection, non-destructive testing, portable ultrasound, material analysis, structural integrity assessment, weld inspection, ultrasonic thickness measurement, high-precision ultrasonic technology, crack detection, industrial ultrasonic equipment, solutions for non-destructive testing, advanced ultrasonic analysis, defect detection in materials, next-generation ultrasonic equipment, corrosion evaluation, ultrasonic quality inspection, advanced NDT technology.

    Masterscan 700m

    The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square Pulser.

    Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.

    Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.

    Read moreDone
  • Masterscan D-70, portable ultrasonic equipment, ultrasonic flaw detector, NDT (non-destructive testing), advanced ultrasonic inspection, material analysis, structural integrity assessment, industrial ultrasonic testing, crack detection, ultrasonic thickness measurement, high-precision ultrasonic technology, weld inspection, solutions for non-destructive testing, next-generation ultrasonic equipment, defect analysis in materials, advanced NDT technology, corrosion evaluation, ultrasonic quality inspection, portable NDT equipment, flaw detection in materials.

    Masterscan D-70

    The Masterscan D-70 offers the inspector a fully capable and functional set of tools and software for inspection across all applications. Capabilities include encoded B-Scan, Advanced Thickness logging and Dryscan capability in a portable enclosure.

    Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ration are key functions in the Masterscan range.

    Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings and Castings, Power Generation (including EMATS) and general UT inspection.

    Read moreDone