Showing 81–96 of 102 results
E2491 PHASED ARRAY CALIBRATION BLOCK (IMPERIAL)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.
Features:
E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam steering capability and capacity. Manufactured in accordance with ASTM E2491.
Features:
E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam capacity and beam direction. Manufactured in accordance with ASTM E2491.
Features:
E2491 PHASED ARRAY CALIBRATION BLOCK (METRIC)
Used to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution. This reference block (metric version) focuses on beam capacity and beam direction. Manufactured in accordance with ASTM E2491.
Features:
PHASED ARRAY CALIBRATION BLOCK TYPE A (IMPERIAL)
The Phased Array Type A block has the following Phased Array applications described:
Beam angle verification.
Sensitivity calibration.
Wedge delay calibration.
DAC/TCG and more.
Features:
PHASED ARRAY CALIBRATION BLOCK TYPE A (IMPERIAL)
The Phased Array Type A block has the following Phased Array applications described:
Beam angle verification.
Sensitivity calibration.
Wedge delay calibration.
DAC/TCG and more.
Features:
PHASED ARRAY CALIBRATION BLOCK TYPE A (METRIC VERSION)
The Phased Array block type A (metric version) has the following Phased Array applications described:
Beam angle verification.
Sensitivity calibration.
Wedge delay calibration.
DAC/TCG and more.
Features:
PHASED ARRAY CALIBRATION BLOCK TYPE A (METRIC VERSION)
The Phased Array block type A (metric version) has the following Phased Array applications described:
Beam angle verification.
Sensitivity calibration.
Wedge delay calibration.
DAC/TCG and more.
Features:
PHASED ARRAY CALIBRATION BLOCK TYPE A (METRIC VERSION)
The Phased Array block type A (metric version) has the following Phased Array applications described:
Beam angle verification.
Sensitivity calibration.
Wedge delay calibration.
DAC/TCG and more.
Features:
V2 (A4) UT CALIBRATION BLOCK (12.5mm THICK) (1.5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1.5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 12.5 mm thickness.
Features:
Dimensions: 1.705″ (height) X 2.953″ (length) X 0.492″ (width).
Weight: 0.472 LBS
Material: 1018 STEEL, NICKEL PLATED
Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
V2 (A4) UT CALIBRATION BLOCK (25mm THICK) (1.5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1.5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 25 mm thickness.
Features:
V2 (A4) UT CALIBRATION BLOCK (25mm THICK) (1.5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1.5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 25 mm thickness.
Features:
V2 (A4) UT CALIBRATION BLOCK (12.5mm THICK) (1.5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1.5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 12.5 mm thickness.
Features:
V2 (A4) UT CALIBRATION BLOCK (25mm THICK) (1.5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1.5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 25 mm thickness.
Features: