Showing 49–64 of 102 results
CALIBRATION BLOCK NO. 1 (K1)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400.
Features:
CALIBRATION BLOCK NO. 1 (K1)
Used to calibrate ultrasonic flaw detection equipment both under laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400.
Features:
CALIBRATION BLOCK NO. 1 (K1)
Used to calibrate ultrasonic flaw detection equipment both under laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400.
Features:
NO. 1 (K1) CALIBRATION BLOCK (WITH CIRCULAR REFLECTOR)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400. The block includes a circular reflector.
Features:
NO. 1 (K1) CALIBRATION BLOCK (WITH CIRCULAR REFLECTOR)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400. The block includes a circular reflector.
Features:
NO. 1 (K1) CALIBRATION BLOCK (WITH CIRCULAR REFLECTOR)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400. The block includes a circular reflector of 25 mm radius, 3 mm depth and 3 mm width.
Features:
Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W).
Weight: 4.084 LBS
Material: 7075-T6 ALUMINIUM
Specifications: EN 12223 & ISO 2400
NO. 1 (K1) CALIBRATION BLOCK (WITH SLOTS)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400. The block includes 2 slots 30 mm long, 4 mm deep and 0.5 mm wide.
Features:
NO. 1 (K1) CALIBRATION BLOCK (WITH SLOTS)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400. The block includes 2 slots 30 mm long, 4 mm deep and 0.5 mm wide.
Features:
NO. 1 (K1) CALIBRATION BLOCK (WITH SLOTS)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400. The block includes 2 slots 30 mm long, 4 mm deep and 0.5 mm wide.
Features:
Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W).
Weight: 4.086 LBS
Material: 7075-T6 ALUMINIUM
Specifications: EN 12223 & ISO 2400
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 12.5 mm thickness.
Features:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICKNESS) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. 12.5 mm thickness.
Characteristics:
BLOQUE DE CALIBRACIÓN Nº 2 (K2) (25 mm DE ESPESOR)
Se utiliza para la comprobación in situ del índice, la base de tiempos, el ángulo del haz y la ganancia de la sonda de onda de cizalladura en miniatura. Fabricado de conformidad con las normas EN 27963, DIN 54-120 e ISO 7963. Espesor de 25 mm.
Características:
CALIBRATION BLOCK No. 2 (K2) (25 mm THICK) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. Thickness 25 mm.
Characteristics:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 12.5 mm thickness.
Features:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICKNESS) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. 12.5 mm thickness.
Characteristics:
CALIBRATION BLOCK No. 2 (K2) (25 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 25 mm thickness.
Features: