Showing 33–48 of 102 results
-
DSC UT CALIBRATION BLOCK (IMPERIAL)
The DSC block is used to calibrate the sensitivity and distance of the shear wave on ultrasonic equipment. With a 1.0″ radius and a 3.0″ radius on opposite faces, the block has a slot spaced .484″ from the flat surface, with a 3.0″ radius machined .375″ deep. The block includes a 0° reference pattern to check the exit point on the wedge, a 1/8″ diameter through hole spaced ¾” from the flat surface, and 45°, 60° and 70° marks to measure the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
- Dimensions: 2.5″ (H) X 4.0″ (L) X 1.0″ (W)
- Weight: 1.701 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E 164 FIG. A1.11
-
DSC UT CALIBRATION BLOCK (IMPERIAL)
The DSC block is used to calibrate the sensitivity and distance of the shear wave on ultrasonic equipment. With a 1.0″ radius and a 3.0″ radius on opposite faces, the block has a slot spaced .484″ from the flat surface, with a 3.0″ radius machined .375″ deep. The block includes a 0° reference pattern to check the exit point on the wedge, a 1/8″ diameter through hole spaced ¾” from the flat surface, and 45°, 60° and 70° marks to measure the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
- Dimensions: 2.5″ (H) X 4.0″ (L) X 1.0″ (W)
- Weight: 0.597 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E 164 FIG. A1.11
-
DSC UT CALIBRATION BLOCK (METRIC)
The DSC block is used to calibrate the sensitivity and shear wave distance of ultrasonic equipment. With a 25mm radius and 75mm on opposite faces, the block has a slot spaced 12.10mm from the flat surface, with a 75mm radius machined to 9.40mm depth. The block includes a 0° reference pattern for checking the exit point on the wedge, a 3.20mm diameter through hole spaced 18.80mm from the flat surface and 45°, 60° and 70° marks for measuring the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
- Dimensions: 2.461″ (H) X 3.937″ (L) X 0.984″ (W)
- Weight: 1,621 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E 164 FIG. A1.11
-
DSC UT CALIBRATION BLOCK (METRIC)
The DSC block is used to calibrate the sensitivity and shear wave distance of ultrasonic equipment. With a 25mm radius and 75mm on opposite faces, the block has a slot spaced 12.10mm from the flat surface, with a 75mm radius machined to 9.40mm depth. The block includes a 0° reference pattern for checking the exit point on the wedge, a 3.20mm diameter through hole spaced 18.80mm from the flat surface and 45°, 60° and 70° marks for measuring the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
- Dimensions: 2.461″ (height) X 3.937″ (length) X 0.984″ (width)
- Weight: 0.569 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E 164 FIG. A1.11
-
CALIBRATION BLOCK IIW TYPE 1 UT (IMPERIAL)
Manufactured in accordance with the International Welding Institute and ASTM E164, the IIW-TYPE 1 block is used for the purposes described below:
Calibration of shear and longitudinal transducers.
Verification of shear wedge exit point and refracted angle.
Verification of resolution and sensitivity.
Features
- Dimensions: 4″ (height) X 12″ (length) X 1″ (width)
- Weight: 11,779 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASTM E 164 FIG. A1.1
-
BLOQUE DE CALIBRACIÓN IIW TIPO 1 UT (IMPERIAL)
Fabricado de acuerdo con el Instituto Internacional de Soldadura y ASTM E164, el bloque IIW-TYPE 1 se utiliza para los fines descritos a continuación:
- Calibración de transductores de cizalladura y longitudinales.
- Verificación del punto de salida de la cuña de cizallamiento y del ángulo refractado.
- Comprobación de la resolución y la sensibilidad.
Características
Dimensiones: 4″ (alto) X 12″ (largo) X 1″ (ancho)
Peso: 11.972 LBS
Material: ACERO INOXIDABLE 304
Especificaciones: ASTM E 164 FIG. A1.1
-
CALIBRATION BLOCK IIW TYPE 1 UT (IMPERIAL)
Manufactured in accordance with the International Welding Institute and ASTM E164, the IIW-TYPE 1 block is used for the purposes described below:
- Calibration of shear and longitudinal transducers.
- Verification of shear wedge exit point and refracted angle.
- Verification of resolution and sensitivity.
Features
- Dimensions: 4″ (height) X 12″ (length) X 1″ (width)
- Weight: 4,286 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E 164 FIG. A1.1
-
CALIBRATION BLOCK IIW TYPE 1 UT (METRIC VERSION)
Manufactured in accordance with the International Welding Institute and ASTM E164, the IIW-TYPE 1 block (metric version) is used for the purposes described below:
Calibration of shear and longitudinal transducers.
Verification of shear wedge exit point and refracted angle.
Verification of resolution and sensitivity.
Features
- Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W)
- Weight: 11.231 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASTM E 164 FIG. A1.1
-
CALIBRATION BLOCK IIW TYPE 1 UT (METRIC VERSION)
Manufactured in accordance with the International Welding Institute and ASTM E164, the IIW-TYPE 1 block (metric version) is used for the purposes described below:
- Calibration of shear and longitudinal transducers.
- Verification of shear wedge exit point and refracted angle.
- Verification of resolution and sensitivity.
- Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W)
- Weight: 11.415 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E 164 FIG. A1.1
-
CALIBRATION BLOCK IIW TYPE 1 UT (METRIC VERSION)
Manufactured in accordance with the International Welding Institute and ASTM E164, the IIW-TYPE 1 block (metric version) is used for the purposes described below:
- Calibration of shear and longitudinal transducers.
- Verification of shear wedge exit point and refracted angle.
- Verification of resolution and sensitivity.
Features
- Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W)
- Weight: 4.086 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E 164 FIG. A1.1
-
IIW TYPE 2 UT (IMPERIAL) CALIBRATION BLOCK
Manufactured in accordance with the specifications of the International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1, the IIW-Type 2 (IIW-Type 1 modified version) is used for the purposes described below:
- Calibration of sensitivity, distance, resolution, and horizontal linearity on Straight Beam Transducers.
- Calibration of beam index, sound path angle, distance time base and distance sensitivity curve on angle beam transducers.
Features
- Dimensions 4″ (height) X 12″ (length) X 1″ (width)
- Weight 11,288 LBS
- Material 1018 STEEL, NICKEL PLATED
- Specifications ASTM E 164 FIG. A1.1. and TM 1-1500-335-23
-
IIW TYPE 2 UT (IMPERIAL) CALIBRATION BLOCK
Manufactured in accordance with the specifications of the International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1, the IIW-Type 2 (IIW-Type 1 modified version) is used for the purposes described below:
- Calibration of sensitivity, distance, resolution, and horizontal linearity on Straight Beam Transducers.
- Calibration of beam index, sound path angle, distance time base and distance sensitivity curve on angle beam transducers.
Features
- Dimensions: 4″ (height) X 12″ (length) X 1″ (width)
- Weight: 11,473 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E 164 FIG. A1.1. & TM 1-1500-335-23
-
IIW TYPE 2 UT (IMPERIAL) CALIBRATION BLOCK
Manufactured in accordance with the specifications of the International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1, the IIW-Type 2 (IIW-Type 1 modified version) is used for the purposes described below:
– Calibration of sensitivity, distance, resolution, and horizontal linearity on.
Straight beam transducers.
– Calibration of beam index, sound path angle, distance time base and distance sensitivity curve on angle beam transducers.
Features
- Dimensions: 4″ (height) X 12″ (length) X 1″ (width)
- Weight: 4,110 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E 164 FIG. A1.1. & TM 1-1500-335-23
-
IIW TYPE 2 UT CALIBRATION BLOCK (METRIC)
Manufactured in accordance with the specifications of the International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1, the IIW-Type 2 (IIW-Type 1 modified version) (Metric Version) is used for the purposes described below:
Calibration of sensitivity, distance, resolution and horizontal linearity on Straight Beam Transducers.
Calibration of beam index, sound path angle, distance time base and distance sensitivity curve on angle beam transducers.
Features
- Dimensions 3.937″ (height) X 11.811″ (length) X 0.984″ (width)
- Weight 10.856 LBS
- Material 1018 STEEL, NICKEL PLATED
- Specifications ASTM E 164 FIG. A1.1. & TM 1-1500-335-23
-
IIW TYPE 2 UT CALIBRATION BLOCK (METRIC)
Manufactured in accordance with the specifications of the International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1, the IIW-Type 2 (IIW-Type 1 modified version) (Metric Version) is used for the purposes described below:
Calibration of sensitivity, distance, resolution and horizontal linearity on Straight Beam Transducers.
Calibration of beam index, sound path angle, distance time base and distance sensitivity curve on angle beam transducers.
Features
- Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W)
- Weight: 11.034 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E 164 FIG. A1.1. & TM 1-1500-335-23
-
IIW TYPE 2 UT CALIBRATION BLOCK (METRIC)
Manufactured in accordance with the specifications of the International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1, the IIW-Type 2 (IIW-Type 1 modified version) (Metric Version) is used for the purposes described below:
Calibration of sensitivity, distance, resolution and horizontal linearity on straight beam transducers.
Calibration of beam index, sound path angle, distance time base and distance sensitivity curve on angle beam transducers.
Features:
- Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W).
- Weight: 3.952 LBS
- Material: 7075-T6 ALUMINUM
- Specifications: ASTM E 164 FIG. A1.1. & TM 1-1500-335-23
