Showing 17–32 of 102 results
-
El bloque de 5 escalones se utiliza para la calibración de espesor y linealidad. Los escalones tienen un grosor de 2,5 mm, 5,0 mm, 7,5 mm, 10,0 mm y 12,5 mm, y cada cara del escalón mide 20 mm x 20 mm. El bloque se fabrica de acuerdo con la norma ASTM E797. Si es necesario, ofrecemos la posibilidad de personalizarlo para escalones adicionales y de mayor tamaño.
Categorías
- Dimensiones: 0.492″ (H) X 3.937″ (L) X 0.787″ (W)
- Peso: 0.260 LBS
- Material: Acero 1018, Niquelado
- Especificaciones: ASTM E797
-
UT 5-STEP CALIBRATION BLOCK.
The 5-step block is used for thickness and linearity calibration. The steps are 2.0 mm, 4.0 mm, 6.0 mm, 8.0 mm and 10.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger step sizes.
Features:
- Dimensions: 0.393″ (H) X 3.937″ (L) X 0.787″ (W)
- Weight: 0.203 LBS
- Material: 2101 DUPLEX STAINLESS STEEL.
- Specifications: ASTM E797
-
The 5-step block is used to calibrate thickness and linearity. The steps are 2.0 mm, 4.0 mm, 6.0 mm, 8.0 mm and 10.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger step sizes.
Features
- Dimensions: 0.393″ (H) X 3.937″ (L) X 0.787″ (W)
- Weight: 0.212 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E797
-
The 5-step block is used to calibrate thickness and linearity. The steps are 2.0 mm, 4.0 mm, 6.0 mm, 8.0 mm and 10.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger step sizes.
Features
- Dimensions: 0.393″ (H) X 3.937″ (L) X 0.787″ (W)
- Weight: 0.212 LBS
- Material: 304 STAINLESS STEEL.
- Specifications: ASTM E797
-
ASME SEC V UT CALIBRATION BLOCK (3/4” THICK)
The Asme Sec V ¾ block is used for obtaining primary reference responses in ultrasonic inspection of primary reference welds in ultrasonic inspection of welds. The calibration block is manufactured with 1 laterally drilled hole on one face (at 3/32“ diameter, 1.75” deep, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 3/32“ diameter, 1.75” deep, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized 2%T deep x 1/8“ wide x 1-3/8” long.
Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
Dimensions: 0.75“ (H) X 6.25” (L) X 6.0” (W)
Weight: 7.985 LBS
Material: 1018 STEEL, NICKEL PLATED
Specifications: ASME SEC V, ART 4, FIG. T-434.2.1
-
ASME SEC V UT CALIBRATION BLOCK (1-1/2″ THICK)
The Asme Sec V 1-1/2 block is used to obtain primary reference responses in ultrasonic inspection of primary reference welds in ultrasonic inspection of welds. The calibration block is manufactured with 1 laterally drilled hole on one face (at 1/8″ diameter, 1.75″ depth, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 1/8″ diameter, 1.75″ depth, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized 2%T deep x 1/8″ wide x 1-3/8″ long. Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
- Dimensions: 1.5″ (H) X 6.25″ (L) X 6.0″ (W)
- Weight: 15,972 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASME SEC V, ART 4, FIG. T-434.2.1
-
BLOQUE DE CALIBRACIÓN ASME SEC V UT (3/4″ DE ESPESOR)
El bloque Asme Sec V ¾ se utiliza para la obtención de respuestas de referencia primarias en la inspección ultrasónica de soldaduras. El bloque de calibración está hecho con 1 orificio perforado lateralmente en una cara (a 3/32″ de diámetro, 1,75″ de profundidad, situado a través del espesor a 1/2T), 2 orificios perforados lateralmente en la cara opuesta (a 3/32″ de diámetro, 1. 75″ de profundidad, situados a través del espesor a ¼ y 3/4T), 2 muescas EDM en las caras superior e inferior, ambas dimensionadas a 2%T de profundidad x 1/8″ de ancho x 1-3/8″ de largo.
Personalización disponible si es necesario para muescas y orificios. El bloque de referencia se fabrica de acuerdo con ASME Sec V Art. 4 Fig. T-434.2.1.
Características
Dimensiones: 0.75″ (H) X 6.25″ (L) X 6.0″ (W)
Peso: 8.117 LBS
Material: ACERO INOXIDABLE 304
Especificaciones: ASME SEC V, ART 4, FIG. T-434.2.1
-
ASME SEC V UT CALIBRATION BLOCK (1-1/2″ THICK)
The Asme Sec V 1-1/2 block is used to obtain primary reference responses in ultrasonic inspection of primary reference welds in ultrasonic inspection of welds. The calibration block is manufactured with 1 laterally drilled hole on one face (at 1/8″ diameter, 1.75″ depth, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 1/8″ diameter, 1.75″ depth, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized 2%T deep x 1/8″ wide x 1-3/8″ long. Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
- Dimensions: 1.5″ (H) X 6.25″ (L) X 6.0″ (W)
- Weight: 16,236 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASME SEC V, ART 4, FIG. T-434.2.1
-
ASME SEC V UT CALIBRATION BLOCK (3/4″ THICK)
The Asme Sec V ¾ block is used for obtaining primary reference responses in ultrasonic inspection of welds. The calibration block is made with 1 laterally drilled hole on one face (at 3/32″ diameter, 1.75″ deep, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 3/32″ diameter, 1. 75″ deep, located through the thickness at ¼ and 3/4T), 2 EDM notches on the top and bottom faces, both sized at 2%T deep x 1/8″ wide x 1-3/8″ long.
Customization available if needed for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
- Dimensions: 0.75″ (H) X 6.25″ (L) X 6.0″ (W)
- Weight: 7.964 LBS
- Material: ASTM A516 GRADE 70 STEEL.
- Specifications: ASME SEC V, ART 4, FIG. T-434.2.1
-
ASME SEC V UT Calibration Block (1-1/2″ thick).
The Asme Sec V 1-1/2 block is used for obtaining primary reference responses in ultrasonic inspection of welds.
The calibration block is manufactured with 1 laterally drilled hole on one face (at 1/8″ diameter, 1.75″ deep, located through the thickness at 1/2T), 2 laterally drilled holes on the opposite face (at 1/8″ diameter, 1.75″ deep, located through the thickness at ¼ & 3/4T), 2 EDM notches on the top and bottom faces, both sized at 2″ deep x 1/” wide x 1-3/8″ long.
Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
- Dimensions: 1.5″ (H) X 6.25″ (L) X 6.0″ (W)
- Weight: 15.931 LBS
- Material: ASTM A516 Grade 70 Steel
- Specifications: ASME SEC V, ART 4, FIG. T-434.2.1
-
BLOQUE DE CALIBRACIÓN ASME SEC V UT (3/4″ DE ESPESOR)
El bloque Asme Sec V ¾ se utiliza para la obtención de respuestas de referencia primarias en la inspección ultrasónica de soldaduras. El bloque de calibración está hecho con 1 orificio perforado lateralmente en una cara (a 3/32″ de diámetro, 1,75″ de profundidad, situado a través del espesor a 1/2T), 2 orificios perforados lateralmente en la cara opuesta (a 3/32″ de diámetro, 1. 75″ de profundidad, situados a través del espesor a ¼ y 3/4T), 2 muescas EDM en las caras superior e inferior, ambas dimensionadas a 2%T de profundidad x 1/8″ de ancho x 1-3/8″ de largo.
Personalización disponible si es necesario para muescas y orificios. El bloque de referencia se fabrica de acuerdo con ASME Sec V Art. 4 Fig. T-434.2.1.
Características
Dimensiones: 0.75″ (H) X 6.25″ (L) X 6.0″ (W)
Peso: 8.117 LBS
Material: 7075-T6 ALUMINUM
Especificaciones: ASME SEC V, ART 4, FIG. T-434.2.1
-
ASME SEC V UT CALIBRATION BLOCK (1-1/2″ THICK)
The Asme Sec V 1-1/2 block is used for obtaining primary reference responses in ultrasonic inspection of welds. The calibration block is manufactured with 1 side drilled hole on one face (at 1/8″ diameter, 1.75″ deep, located through the thickness at 1/2T), 2 side drilled holes on the opposite face (at 1/8″ diameter, 1.75″ deep, located through the thickness at ¼ & 3/4T), 2 EDM notches on the top and bottom faces, both sized at 2%T deep x 1/8″ wide x 1-3/8″ long.
Customization available if required for notches and holes. Reference block is manufactured in accordance with ASME Sec V Art 4 Fig. T-434.2.1.
Features
- Dimensions: 1.5″ (height) X 6.25″ (length) X 6.0″ (width)
- Weight: 5,703 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASME SEC V, ART 4, FIG. T-434.2.1
-
AWS RESOLUTION UT CALIBRATION BLOCK
The AWS Resolution Block (RC Block) is used to check the resolution capability of angle beam transducers. With 3 sets of 3 through holes of 1.59 mm (0.0626″) diameter for 45°, 60° and 70°, the block is manufactured in accordance with AWS Welding Highway and Railway Bridges Specification D2.0, and ANSI/AWS D1.1 Structural Welding Code.
Features
- Dimensions: 1.0″ (height) X 6.0″ (length) X 3.0″ (width)
- Weight: 5,108 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: AWS D1.1/D1.1M FIGURE 6.20
-
AWS RESOLUTION UT CALIBRATION BLOCK
The AWS resolution block (RC block) is used to check the resolution capability of angle beam transducers. With 3 sets of 3 through holes of 1.59 mm (0.0626â⒬Â) diameter for 45°, 60° and 70°, the block is manufactured in accordance with AWS Welding Highway and Railway Bridges Specification D2.0, and ANSI/AWS D1.1 Structural Welding Code.
Features
- Dimensions: 1.0″ (height) X 6.0″ (length) X 3.0″ (width)
- Weight: 5,193 LBS
- Material: 304 STAINLESS STEEL
- Specifications: AWS D1.1/D1.1M FIGURE 6.20
-
AWS RESOLUTION UT CALIBRATION BLOCK
The AWS resolution block (RC block) is used to check the resolution capability of angle beam transducers. With 3 sets of 3 through holes of 1.59 mm (0.0626â⒬Â) diameter for 45°, 60° and 70°, the block is manufactured in accordance with AWS Welding Highway and Railway Bridges Specification D2.0, and ANSI/AWS D1.1 Structural Welding Code.
Features
- Dimensions: 1.0″ (height) X 6.0″ (length) X 3.0″ (width)
- Weight: 1,824 LBS
- Material: 7075-T6 ALUMINUM
- Specifications: AWS D1.1/D1.1M FIGURE 6.20
-
DSC UT CALIBRATION BLOCK (IMPERIAL)
The DSC block is used to calibrate the sensitivity and distance of the shear wave on ultrasonic equipment. With a 1.0″ radius and a 3.0″ radius on opposite faces, the block has a slot spaced .484″ from the flat surface, with a 3.0″ radius machined .375″ deep. The block includes a 0° reference pattern to check the exit point on the wedge, a 1/8″ diameter through hole spaced ¾” from the flat surface, and 45°, 60° and 70° marks to measure the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
- Dimensions: 2.5″ (H) X 4.0″ (L) X 1.0″ (W)
- Weight: 1.673 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASTM E 164 FIG. A1.11
