Showing all 11 results
The 4-step block is used to calibrate thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20x20mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used to calibrate thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20mmx20mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
The 4-step block is used to gauge thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20mmx20mm. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 6.25 mm, 12.5 mm, 18.75 mm and 25 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 6.25 mm, 12.5 mm, 18.75 mm and 25 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
The 4-step block is used to gauge thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20mmx20mm. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features