Showing 1–16 of 153 results
Ultrasonic cable (UT) DUAL LEMO-00 PLUG to DUAL LEMO-00 PLUG, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in the USA.
CUSTOM CABLES CAN ALSO BE MANUFACTURED AS PER REQUEST (MINIMUM QTY REQUIRED).
Ultrasound cable (UT) DUAL LEMO-00 PLUG to DUAL MINI MICRODOT, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in USA.
The 4-step block is used to calibrate thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20x20mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used to calibrate thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20mmx20mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
The 4-step block is used to gauge thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20mmx20mm. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 6.25 mm, 12.5 mm, 18.75 mm and 25 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 6.25 mm, 12.5 mm, 18.75 mm and 25 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
The 4-step block is used to gauge thickness and linearity. The steps are 0.250″/6.25mm, 0.500″/1205mm, 0.750″/18.75mm and 1.000″/25mm thick with each step face measuring 0.750 “x0.750″/20mmx20mm. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer customization for additional and larger steps.
Features
The 4-step block is used for thickness and linearity calibration. The steps are 5.0 mm, 10.0 mm, 15.0 mm and 20.0 mm thick, and each step face measures 20 mm x 20 mm. The block is manufactured in accordance with ASTM E797. If required, we offer the possibility of customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Calibration block for 4-step UT TIPSY
The 4-step block is used for thickness and linearity calibration. The steps are 1.0″, 2.0″, 3.0″, 4.0″ thick on one side, and 1.5″, 2.5″, 3.5″, 4.5″ thick on the opposite side, and each step face measures 1 “x1”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 5-step block is used for thickness and linearity calibration. The steps are 0.500″, 0.400″, 0.300″, 0.200″ and 0.100″ thick, and each step face measures 0.750″ x 0.750″. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
The 5-step block is used to calibrate thickness and linearity. The steps are 0.500″, 0.400″, 0.300″, 0.200″ and 0.100″ thick, and each step face measures 0.750 “x0.750”. The block is manufactured in accordance with ASTM E797. If needed, we offer customization for additional and larger steps.
Features
Dimensions: 0.5″ (height) X 3.75″ (length) X 0.75″ (width)
Weight: 0.234 LBS
Material: 2101 Duplex Stainless Steel
Specifications: ASTM E797