LEMO-00 to LEMO-1
Ultrasonic cable (UT) LEMO-00 to LEMO-1, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in USA.
Non-Destructive Testing (NDT)
Showing 129–144 of 253 results
-
-
LEMO-00 to MICRODOT
Ultrasound cable (UT) LEMO-00 to MICRODOT, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in USA.
-
M-Series
Mobile Power Packs Electromagnetic Current Generators for AC or HWDC Magnetization
The M-Series mobile power pack portable current generators facilitate testing of large and abnormally heavy parts with magnetic particle inspection. Magnaflux understands some parts cannot be moved so the magnetizing station needs to be brought to the part. The M-Series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC output.
-
MAB-1018
MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)
The Mini Angle Beam (Mini Angle Beam or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured to ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 2″/50mm radius, a 1″/25mm opposing radius and a flat bottom hole 1.0780″/2mm in diameter and 0.75″/18.75mm deep.
Features:
- Dimensions: 1.732″ (H) X 3″ (L) X 1″ (W).
- Weight: 0.989 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: ASTM E 164 FIG. A1.12.
-
MAB-304
MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)
MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)
The Mini Angle Beam (Mini Angle Beam or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured to ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 2″/50mm radius, a 1″/25mm opposing radius and a flat bottom hole 1.0780″/2mm in diameter and 0.75″/18.75mm deep.
Features:
- Dimensions: 1.732″ (H) X 3″ (L) X 1″ (W).
- Weight: 1.006 LBS
- Material: STAINLESS STEEL 304
- Specifications: ASTM E 164 FIG. A1.12.
-
MAB-7075
MINI ANGLE BEAM UT CALIBRATION BLOCK (IMPERIAL)
The Mini Angle Beam (Mini Angle Beam or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured to ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 2″/50mm radius, a 1″/25mm opposing radius and a flat bottom hole 1.0780″/2mm in diameter and 0.75″/18.75mm deep.
Features:
- Dimensions: 1.732″ (H) X 3″ (L) X 1″ (W).
- Weight: 0.353 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E 164 FIG. A1.12.
-
MAB-M-1018
MINI ANGLE CALIBRATION BLOCK FOR ULTRASOUND (METRIC)
The Mini Angle Beam Block (Angle Beam Block or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured in accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 50 mm radius, a 25 mm opposing radius and a 2 mm diameter, 18.75 mm deep flat bottom hole.
Features
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width)
- Weight: 0.943 LBS
- Material: 1018 STEEL, NICKEL PLATED.
- Specifications: ASTM E 164 FIG. A1.12.
-
MAB-M-304
MINI ANGLE BEAM UT CALIBRATION BLOCK (METRIC)
The Mini Angle Beam (Mini Angle Beam) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured in accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 50 mm radius, a 25 mm opposing radius, and a 2 mm diameter, 18.75 mm deep flat bottom hole.
Features:
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
- Weight: 0.959 LBS
- Material: 304 STAINLESS STEEL
- Specifications: ASTM E 164 FIG. A1.12.
-
MAB-M-7075
MINI ANGLE BEAM UT CALIBRATION BLOCK (METRIC)
The Mini Angle Beam Block (Angle Beam Block or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured in accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 50 mm radius, a 25 mm opposing radius, and a 2 mm diameter, 18.75 mm deep flat bottom hole.
Features:
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
- Weight: 0.337 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: ASTM E 164 FIG. A1.12.
-
Mag Kit
Modular Magnetic Particle Inspection System
The Mag Kit is a sectional magnetic particle testing system for low volume non-destructive testers with the benefits of an operational magnetic wet bench but without the investment of a production-level mag bench.
Using a P-series portable power pack as a power supply, the Mag Kit is an economical, easy to operate alternative to more expensive, higher volume bench units when volume processing is not required. It provides the same level of inspection dependability in a lower volume, lower cost equipment package.
-
Magnetic Coils
For Magnetic Particle Inspection Benches
Ensure your magnetic inspection bench fits every part you test with this line of fixed magnetizing coils by outfitting your wet bench to match your range of parts, and optimize magnetic field application. Whether you are testing a large pieces or small bolts, these heavy-duty magnetic coils will help you set-up your Magnaflux machine just the way you need.
-
Magnetic fields
This range of field indicators is to help you check and measure magnetic field strength and direction during the magnetic particle inspection process. Rugged, pocket-size 10 and 20 gauss meters and pie gauge indicator provide flexibility in measuring residual part magnetism, field direction and AC/DC field strength in mag particle testing applications.
-
Magnetic Particle Applicators
Magnetic Particle Spray System
To help you optimize your magnetic particle inspections, these magnetic particle applicators provide a convenient method for applying an even, adjustable flow of magnetic particles across large test parts or in situations where only spot particle application is required. The coverage speed and consistency provided by these applicators can dramatically improve application uniformity and part processing time.
-
Magnetic Particle Test Pieces
Dispositivos de Evaluación de Rendimiento de Partículas Magnéticas.
Estas piezas de ensayo para la inspección por partículas magnéticas le ayudarán a mantener el proceso de prueba por partículas magnéticas ya que verifican el rendimiento de la partícula magnética. Utilícelas para comprobar el deterioro de las partículas magnéticas, comparar diferentes polvos magnéticos, verificar la sensibilidad o visibilidad o asegurar la dirección y la fuerza del campo.
-
MARE-1018
NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)
The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.
Features:
- Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
- Weight: 12,791 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specs: t9074-AS-GIB-010/271-ACN1
-
MARE-304
NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)
The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.
Features:
- Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
- Weight: 13.002 LBS
- Material: STAINLESS STEEL 304
- Especificaciones: t9074-AS-GIB-010/271-ACN1