Showing 113–128 of 258 results
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 12.5 mm thickness.
Features:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICKNESS) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. 12.5 mm thickness.
Characteristics:
BLOQUE DE CALIBRACIÓN Nº 2 (K2) (25 mm DE ESPESOR)
Se utiliza para la comprobación in situ del índice, la base de tiempos, el ángulo del haz y la ganancia de la sonda de onda de cizalladura en miniatura. Fabricado de conformidad con las normas EN 27963, DIN 54-120 e ISO 7963. Espesor de 25 mm.
Características:
CALIBRATION BLOCK No. 2 (K2) (25 mm THICK) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. Thickness 25 mm.
Characteristics:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 12.5 mm thickness.
Features:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICKNESS) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. 12.5 mm thickness.
Characteristics:
CALIBRATION BLOCK No. 2 (K2) (25 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 25 mm thickness.
Features:
CALIBRATION BLOCK No. 2 (K2) (25 mm THICK) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. Thickness 25 mm.
Characteristics:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 12.5 mm thickness.
Features:
CALIBRATION BLOCK No. 2 (K2) (12.5 mm THICKNESS) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. 12.5 mm thickness.
Characteristics:
CALIBRATION BLOCK No. 2 (K2) (25 mm THICK)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. 25 mm thickness.
Features:
CALIBRATION BLOCK No. 2 (K2) (25 mm THICK) (DOUBLE MARKED)
Used for on-site checking of index, time base, beam angle and gain of miniature shear wave probe. Manufactured in accordance with EN 27963, DIN 54-120 and ISO 7963. Marking present on both sides of the block. Thickness 25 mm.
Characteristics:
The most portable phased-array ultrasound scanning solution with miniaturized electronic instruments that combine phased-array power at the probe.
Phased Array Inspection of Spot Welds.
With the increase in vehicle production, the automotive industry is turning to image-based inspection to reduce downtime while maintaining high quality standards.
Sleek but rugged, the Krautkrämer USM 100 is a portable, highly versatile flaw detector with smartphone-like capabilities. Designed ergonomically for unrivaled ease of use, it features a large touch screen and buttons that allow seamless ambidextrous operation. Digital features include a best-in-class user interface that streamlines setup, training time and updates.
The handy L-10 portable magnetic coil is great for field applications to magnetize a variety of part sizes and shapes for magnetic particle inspection. It is specifically designed to detect transverse defects in shafts, spindles and similar components.
The L-10 has a wear-resistant resin coating, and is supplied with a footswitch to energise the coil and 10 metres of flexible supply cable.