Showing 65–80 of 253 results
A versatile thickness meter used for a wide range of applications, the Cygnus 4+ offers: live A-scan display; sequential data logging (recording of measurements); an optional high temperature transducer; and 3 distinct measuring modes to cope with a wide range of situations. All these features are wrapped up in a hugely robust housing – and the unit is still extremely simple to operate.
The Cygnus 6+ UT thickness gage boasts a full suite of features for the demanding professional user, including: A-scan; B-scan; full data recording capability; 3 distinct measuring modes; high temperature transducer and manual gain control.
The D-Series is one of our most powerful wet magnetic benches. Providing 3-phase Full Wave Direct Current, this MPI equipment offers maximum magnetization for finding surface and sub-surface defects with clearer indications while using minimal power.
The two outputs are independently adjustable to set each magnetic field, circular or longitudinal.
D-Series magnetic benches are available in two models: D-2060 and D-2100.
Compatible with our best-in-industry probes, DM5E corrosion thickness gauges represent the highest standard of accurate, easy-to-use thickness measurement.
Lightweight and ergonomically designed for everyday use, its intuitive interface and simple calibration give you measurements you can rely on, even in the harshest working environments.
Featuring intuitive, easy-to-use arrow-keypad control, powerful data management and the latest industrial electronics to provide accurate, reliable and comprehensive thickness inspection data. The Krautkrämer DMS Go+ thickness gauge that can be easily converted into a comprehensive flaw detector with a simple software upgrade
DSC UT CALIBRATION BLOCK (IMPERIAL)
The DSC block is used to calibrate the sensitivity and distance of the shear wave on ultrasonic equipment. With a 1.0″ radius and a 3.0″ radius on opposite faces, the block has a slot spaced .484″ from the flat surface, with a 3.0″ radius machined .375″ deep. The block includes a 0° reference pattern to check the exit point on the wedge, a 1/8″ diameter through hole spaced ¾” from the flat surface, and 45°, 60° and 70° marks to measure the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
DSC UT CALIBRATION BLOCK (IMPERIAL)
The DSC block is used to calibrate the sensitivity and distance of the shear wave on ultrasonic equipment. With a 1.0″ radius and a 3.0″ radius on opposite faces, the block has a slot spaced .484″ from the flat surface, with a 3.0″ radius machined .375″ deep. The block includes a 0° reference pattern to check the exit point on the wedge, a 1/8″ diameter through hole spaced ¾” from the flat surface, and 45°, 60° and 70° marks to measure the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
DSC UT CALIBRATION BLOCK (IMPERIAL)
The DSC block is used to calibrate the sensitivity and distance of the shear wave on ultrasonic equipment. With a 1.0″ radius and a 3.0″ radius on opposite faces, the block has a slot spaced .484″ from the flat surface, with a 3.0″ radius machined .375″ deep. The block includes a 0° reference pattern to check the exit point on the wedge, a 1/8″ diameter through hole spaced ¾” from the flat surface, and 45°, 60° and 70° marks to measure the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
DSC UT CALIBRATION BLOCK (METRIC)
The DSC block is used to calibrate the sensitivity and shear wave distance of ultrasonic equipment. With a 25mm radius and 75mm on opposite faces, the block has a slot spaced 12.10mm from the flat surface, with a 75mm radius machined to 9.40mm depth. The block includes a 0° reference pattern for checking the exit point on the wedge, a 3.20mm diameter through hole spaced 18.80mm from the flat surface and 45°, 60° and 70° marks for measuring the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
DSC UT CALIBRATION BLOCK (METRIC)
The DSC block is used to calibrate the sensitivity and shear wave distance of ultrasonic equipment. With a 25mm radius and 75mm on opposite faces, the block has a slot spaced 12.10mm from the flat surface, with a 75mm radius machined to 9.40mm depth. The block includes a 0° reference pattern for checking the exit point on the wedge, a 3.20mm diameter through hole spaced 18.80mm from the flat surface and 45°, 60° and 70° marks for measuring the actual refraction angle.
Manufactured in accordance with ASTM E164 and AWS 6.16.1B.
Features
Ultrasonic cable (UT) DUAL BNC TO DUAL LEMO-00, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in the USA.
CUSTOM CABLES CAN ALSO BE MANUFACTURED AS PER REQUEST (MINIMUM QTY REQUIRED)
Ultrasound cable (UT) DUAL BNC to DUAL LEMO-00 PLUG, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in the USA.
CUSTOM CABLES CAN ALSO BE MANUFACTURED AS PER REQUEST (MINIMUM QTY REQUIRED)
Ultrasonic cable (UT) DUAL BNC to DUAL MICRODOT, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in the USA.
CUSTOM CABLES CAN ALSO BE MANUFACTURED AS PER REQUEST (MINIMUM QTY REQUIRED).
Ultrasonic cable (UT) DUAL LEMO 00 PLUG to DUAL MICRODOT, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in USA.