LEMO-00 to MICRODOT
Ultrasound cable (UT) LEMO-00 to MICRODOT, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in USA.
Non-Destructive Testing (NDT)
Showing 17–32 of 119 results
-
-
M-Series
Mobile Power Packs Electromagnetic Current Generators for AC or HWDC Magnetization
The M-Series mobile power pack portable current generators facilitate testing of large and abnormally heavy parts with magnetic particle inspection. Magnaflux understands some parts cannot be moved so the magnetizing station needs to be brought to the part. The M-Series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC output.
-
MAB-M-1018
MINI ANGLE CALIBRATION BLOCK FOR ULTRASOUND (METRIC)
The Mini Angle Beam Block (Angle Beam Block or Rompas) is a substitute for the DSC Block. It is used to calibrate distance, beam index, refracted angle and sensitivity. Manufactured in accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications, the block includes a 50 mm radius, a 25 mm opposing radius and a 2 mm diameter, 18.75 mm deep flat bottom hole.
Features
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width)
- Weight: 0.943 LBS
- Material: 1018 STEEL, NICKEL PLATED.
- Specifications: ASTM E 164 FIG. A1.12.
-
Magnetic Coils
For Magnetic Particle Inspection Benches
Ensure your magnetic inspection bench fits every part you test with this line of fixed magnetizing coils by outfitting your wet bench to match your range of parts, and optimize magnetic field application. Whether you are testing a large pieces or small bolts, these heavy-duty magnetic coils will help you set-up your Magnaflux machine just the way you need.
-
Magnetic fields
This range of field indicators is to help you check and measure magnetic field strength and direction during the magnetic particle inspection process. Rugged, pocket-size 10 and 20 gauss meters and pie gauge indicator provide flexibility in measuring residual part magnetism, field direction and AC/DC field strength in mag particle testing applications.
-
Magnetic Particle Applicators
Magnetic Particle Spray System
To help you optimize your magnetic particle inspections, these magnetic particle applicators provide a convenient method for applying an even, adjustable flow of magnetic particles across large test parts or in situations where only spot particle application is required. The coverage speed and consistency provided by these applicators can dramatically improve application uniformity and part processing time.
-
Magnetic Particle Test Pieces
Dispositivos de Evaluación de Rendimiento de Partículas Magnéticas.
Estas piezas de ensayo para la inspección por partículas magnéticas le ayudarán a mantener el proceso de prueba por partículas magnéticas ya que verifican el rendimiento de la partícula magnética. Utilícelas para comprobar el deterioro de las partículas magnéticas, comparar diferentes polvos magnéticos, verificar la sensibilidad o visibilidad o asegurar la dirección y la fuerza del campo.
-
MARE-304
NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)
The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.
Features:
- Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
- Weight: 13.002 LBS
- Material: STAINLESS STEEL 304
- Especificaciones: t9074-AS-GIB-010/271-ACN1
-
MARE-7075
NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)
The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.
Features:
- Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
- Weight: 4,567 LBS
- Material: 7075-T6 ALUMINIUM}
- Especificaciones: t9074-AS-GIB-010/271-ACN1
-
Masterscan 700m
The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square Pulser.
Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.
Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.
-
Masterscan D-70
The Masterscan D-70 offers the inspector a fully capable and functional set of tools and software for inspection across all applications. Capabilities include encoded B-Scan, Advanced Thickness logging and Dryscan capability in a portable enclosure.
Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ration are key functions in the Masterscan range.
Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings and Castings, Power Generation (including EMATS) and general UT inspection.
-
MD-Series
Multi-Directional Magnetic Wet Benches for AC, HWDC or 1-Phase FWDC Magnetization
The MD-Series multi-directional magnetic bench offers Alternating Current, Half Wave Direct Current and 1-phase Full Wave Direct Current for time-saving multidirectional magnetization which can find defects in all orientations with one mag-cycle.
-
Mentor UT
Accurate and intuitive UT flaw detector system
Mentor UT offers a new kind of inspection experience by combining outstanding UT performance, customizable workflow applications and user interfaces, and intuitive hardware with embedded expertise—making inspections more accessible and efficient.
-
-
MG-410
Fluorescent Magnetic Particles
MG-410 is an ultra-bright fluorescent magnetic particle powder for locating small, medium, and large discontinuities. These particles provide clear, ultra-bright, fluorescent green indications under UV light with minimal background. MG-410 is designed for use in water or oil baths for wet method fluorescent magnetic particle testing.
-
MG-450A
Fluorescent Magnetic Particle Premix
MG-450A is a borax-free ultra-high fluorescence magnetic particle premix for locating small, medium and gross discontinuities in high-volume applications using wet method magnetic particle testing.
Designed to mix with water, MG-450A improves indication visibility with less background fluorescence because of the high-strength, high-fluorescent MG-410 particles.