Showing 225–240 of 253 results
Complete solutions are available from which you can choose the best way to process your films in combination with the fully compatible STRUCTURIX chemicals and equipment. Waygate Technologies, formerly known as GE Inspection Technologies, provides a complete range of STRUCTURIX processors with varying levels of capability, from a versatile benchtop model to a highly sophisticated model, all designed to ensure optimum quality of results.
The negatoscope is an essential tool in industrial radiography that improves the visualization of radiographs and optimizes efficiency in inspection processes. With a number of benefits, key features and advantages, the negatoscope has become a reliable solution for industry professionals.
The X-Rite densitometer is the essential tool for ensuring accuracy and reliability in industrial radiography. Designed with the most advanced technology, this device offers a number of key benefits and features that make it the preferred choice of professionals worldwide.
The Y-2 is an AC electromagnetic yoke, ergonomically designed to improve productivity and reduce operator arm and wrist fatigue. The yoke generates a strong AC magnetic field for the detection of surface indications during magnetic particle testing.
The Y-7 is a durable, high-strength AC/DC magnetic yoke designed to detect surface and sub-surface indications in the most rugged applications.
Featuring sealed chemical-resistant construction, articulating legs to contour to any part shape and robust strain-relieved twelve-foot cord for field use, the Y-7 is ideal for inspection of welds and other remote testing.
The Y-8 is a battery-powered, DC electromagnetic yoke designed to stand up to the most rugged applications. True portability for magnetic particle inspection in the field and remote locations is achieved through a compact battery pack which provides a full 8-hour shift of inspection power.
The LED yoke light is an additional accessory for the Y-2 AC yoke that provides visible, focused light to the yoke inspection area when the yoke is activated. The high brightness light is designed to enhance visible detection of faults and discontinuities in low conditions and in hard-to-reach areas not accessible to a secondary light source.
Use the yoke light and yoke test weight to enhance your magnetic particle inspections with Magnaflux Y-2 electromagnetic yokes.
The Yoke Test Weight is a certified 10 lb / 4.5 kg weight designed specifically for AC magnetic yokes to confirm the yoke has sufficient strength to perform magnetic particle inspections. Each Yoke Test Weight has a built-in leg positioning guide to assure balanced distribution and accurate test results.
ZAF-2 is an excellent general-purpose defoaming additive to eliminate and prevent foaming in water-based magnetic particle suspensions, aqueous penetrant developer baths, hydrophilic penetrant remover baths and aqueous cleaning solutions. A few drops of ZAF-2 are enough to eliminate foaming in most water-based solutions.
ZAF-2 can be sprinkled onto the surfaces of baths to eliminate foaming. It is not intended to remove fine lather which may occur in recirculating baths where there is excessive air intake in the recirculation pump.
A Method B lipophilic emulsifier, ZE-4E diffuses into the penetrant to clear the penetrant from the surface of the part being inspected. It is rinsed from the part by water, carrying penetrant off the part surface. Designed to be used with post-emulsifiable penetrants Level 2 ZL-2C, Level 3 ZL-27A or Level 4 ZL-37. Benefits include low volatility and a high flash point, so ZE-4E can be used in open immersion tanks.
ZE-4E is listed on the QPL SAE AMS 2644 Qualified Product List.
Specially designed to reduce the cost of quality inspections, ZL-150 fluorescent water washable penetrant is ideal for finding indications in rough cast parts in high-volume dip applications. Foundries and casting houses will find this penetrant particularly useful in reducing cost while maintaining strong Level 2 fluorescent penetrant performance in sensitivity and removability.
ZL-15B water washable penetrant is a low-sensitivity penetrant that features excellent washability. It is used to find open surface flaws such as cracks and porosity in seams, laps, cold shuts, and laminations on castings, forgings, extrusions, and parts with rough surfaces.
A water-removeable Level 1 penetrant, ZL-19 is designed for use on rough or unmachined surfaces such as castings and forgings to find larger discontinuities in non-safety critical components. It is ideal for inspecting automotive and general industrial components such as engine cylinder blocks, power train components, rocker arms, pistons, steering knuckles, etc.
Post-emulsifiable ZL-27A is a Level 3, high-sensitivity Type 1 penetrant designed for inspections which require maximum process control and reliability, such as safety-critical aerospace testing. Since ZL-27A is not water soluble, there is minimal risk of this penetrant being removed from a fine or shallow defect through over-washing to provide the highest reliability of any penetrant inspection method.