Showing 209–224 of 253 results
-
V2 (A4) UT CALIBRATION BLOCK (12.5mm THICK) (1.5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1.5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 12.5 mm thickness.
Features:
- Dimensions: 1.705″ (H) X 2.953″ (L) X 0.492″ (W).
- Weight: 0.168 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
-
V2 (A4) UT CALIBRATION BLOCK (25mm THICK) (1.5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1.5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 25 mm thickness.
Features:
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
- Weight: 0.337 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
-
V2 (A4) UT CALIBRATION BLOCK (12.5mm THICK) (5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1 5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 12.5 mm thickness.
Features:
- Dimensions: 1.705″ (H) X 2.953″ (L) X 0.492″ (W).
- Weight: 0.468 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
-
V2 (A4) UT CALIBRATION BLOCK (25mm THICK) (5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1 5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 25 mm thickness.
Features:
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
- Weight: 0.951 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
-
V2 (A4) BLOQUE DE CALIBRACIĂ“N UT (12,5mm DE ESPESOR) (5mm DIA Agujero)
Utilizado para la comprobaciĂłn del Ăndice de la sonda de onda cortante en miniatura, la base de tiempo, el ángulo del haz y la ganancia, el bloque incluye un radio de 50 mm, un radio opuesto de 25 mm y un orificio pasante de 1 5 mm de diámetro. Fabricado de acuerdo con la norma británica BS 2704 bloque A4, Fig. 4, y AS 2083. Espesor de 12,5 mm.
CaracterĂsticas:
- Dimensiones: 1,705″ (alto) X 2,953″ (largo) X 0,492″ (ancho)
- Peso: 0.476 LBS
- Material: ACERO INOXIDABLE 304
- Especificaciones: BS 2704 BLOQUE A4 FIGURA 4. & AS 2083
-
V2 (A4) UT CALIBRATION BLOCK (25mm THICK) (5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1 5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 25 mm thickness.
Features:
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
- Weight: 0.951 LBS
- Material: 304 STAINLESS STEEL
- Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
-
V2 (A4) UT CALIBRATION BLOCK (12.5mm THICK) (5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1 5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 12.5 mm thickness.
Features:
- Dimensions: 1.705″ (H) X 2.953″ (L) X 0.492″ (W).
- Weight: 0.167 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
-
V2 (A4) UT CALIBRATION BLOCK (25mm THICK) (5mm DIA Hole)
Used for testing miniature shear wave probe index, time base, beam angle and gain, the block includes a 50mm radius, a 25mm opposing radius and a 1 5mm diameter through hole. Manufactured in accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. 25 mm thickness.
Features:
- Dimensions: 1.705″ (height) X 2.953″ (length) X 0.984″ (width).
- Weight: 0.334 LBS
- Material: 7075-T6 ALUMINIUM
- Specifications: BS 2704 BLOCK A4 FIGURE 4. & AS 2083
-
Retaining the best features of the established Veo line, the new Veo3 now offers a PCAP touch interface, user templates, and more importantly, live TFM.
-
Water Conditioner
WA-2B is a general-purpose water-conditioning powder to enhance surface wetting and magnetic particle dispersion stability in water-based magnetic particle suspensions. Its unique blend of wetting agents, corrosion inhibitors and anti-forming agents eliminates the need for additional water conditioning agents.
A white granular powder that is added to water baths in wet method magnetic particle testing with no further bath treatment required. WA-2B features good surface wetting and particle dispersion, and will not cake in storage. WA-2B is added to the water bath and stirred until dissolved before the magnetic particles are added.
-
Next generation technology at your fingertips
What if you could tailor the settings on your UT device and alter it to your own process and people’s needs? An instrument where all the useful parameters are pre-set and available in less than two clicks? Now you can.
Introducing WAVE by Sonatest. It integrates the latest technologies available in order to create a revolution in the ultrasonic non-destructive testing equipment market. Not only is it innovative, but the customisable interface also optimises the daily workflow, and a unique and embedded interactive scan plan, with ray-tracing capability, simulation tools and CAD import capability, consolidates your results.
Its wifi capability allows you to access it anywhere in the field, eases data transfer, application installation and manages calibration date and software version.
-
Faster. More accurate. Better.
With the growing demand for faster, cheaper inspections without compromising the accuracy of results, most equipment can’t handle the pressure. Combining portability with military-grade durability, the Everest Mentor Flex answers the call with the features you’ve always wished you had for the tasks that demand it – all to help you make smart decisions, fast.
-
Discover the power of HD video and 3D measurement in your video scope inspections.
The Mentor iQ Video Probe is an industrial videoscope with a military-grade portable design to ensure ease of use in any industrial environment. With the Mentor Visual iQ, you will enjoy the benefits of an HD inspection camera combined with integrated connectivity options that make advanced detection and collaborative decision making possible on the fly.
-
Simplified RVI. Guaranteed uptime.
Led by sharp, detailed image quality and intuitive software, the Waygate Technologies XL Detect and XL Detect+ VideoProbe combine portability and durability in a system light enough to avoid user fatigue, rugged enough to withstand the harshest inspection environments, and designed to meet a wide range of industrial applications.
-
White Contrast Paint
A bright white, opaque NDT contrast paint, WCP-2 provides a high contrast background to improve probability of detection and sensitivity during visible magnetic particle inspections.
This fast drying paint aerosol sprays on evenly, without flaking, before inspection so when non-florescent / colored magnetic particles are applied, the indications appear clearly against the opaque white background.
WCP-2 can be used with all types of colored and visible mag particles, including 7HF or 7C Black wet method particles, and #2 Yellow or #8A Red dry method magnetic powders.
-
Waygate Technologies’ FS50B film digitizer is designed to provide high performance film digitizing with superior quality and optimum productivity. The steel housing is perfect for the harsh industrial environments of NDT applications. It allows digitizing all standard film formats up to a width of 35 cm, without length limitation and in any resolution between 50 µm and 500 µm. The FS50B remains the first and only digitizer on the market that can process the entire density spectrum in one scan with the required contrast sensitivity for class DS according to EN 14096-2.
