Non-Destructive Testing (NDT)

  • MARE-7075

    MARE-7075

    NAVSHIPS CALIBRATION BLOCK TYPE UT (MARE ISLAND TYPE)

    The navships block is used for distance amplitude correction, sensitivity levels and flaw depth information. Surface ground to a 16 Ra finish and manufactured in accordance with MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6, the block includes 6 3/64″ diameter through holes at scan surface distances of 0.25″, 0.50″, 0.75″, 1.00″, 1.25″ and 1.50″.

    Features:

    • Dimensions: 3″ (height) X 12″ (length) X 1.25″ (width).
    • Weight: 4,567 LBS
    • Material: 7075-T6 ALUMINIUM}
    • Especificaciones: t9074-AS-GIB-010/271-ACN1
    Read moreDone
  • Masterscan 700M, ultrasonic flaw detector, advanced NDT equipment, ultrasonic inspection, non-destructive testing, portable ultrasound, material analysis, structural integrity assessment, weld inspection, ultrasonic thickness measurement, high-precision ultrasonic technology, crack detection, industrial ultrasonic equipment, solutions for non-destructive testing, advanced ultrasonic analysis, defect detection in materials, next-generation ultrasonic equipment, corrosion evaluation, ultrasonic quality inspection, advanced NDT technology.

    Masterscan 700m

    The Masterscan 700M offers the end user a high end narrowband flaw detector with a full VGA display, sync and proportional outputs, sync input and a Spike and Square Pulser.

    Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ratio are key functions in the Masterscan range.

    Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power Generation (including EMATS) and general UT inspection.

    Read moreDone
  • Masterscan D-70, portable ultrasonic equipment, ultrasonic flaw detector, NDT (non-destructive testing), advanced ultrasonic inspection, material analysis, structural integrity assessment, industrial ultrasonic testing, crack detection, ultrasonic thickness measurement, high-precision ultrasonic technology, weld inspection, solutions for non-destructive testing, next-generation ultrasonic equipment, defect analysis in materials, advanced NDT technology, corrosion evaluation, ultrasonic quality inspection, portable NDT equipment, flaw detection in materials.

    Masterscan D-70

    The Masterscan D-70 offers the inspector a fully capable and functional set of tools and software for inspection across all applications. Capabilities include encoded B-Scan, Advanced Thickness logging and Dryscan capability in a portable enclosure.

    Features can be added and upgrades performed in the working environment, reducing downtime and increasing working flexibility. High levels of near surface resolution, penetrating power (450V pulser – square and spike) and excellent signal to noise ration are key functions in the Masterscan range.

    Typical applications are Weld Fabrication, Corrosion Detection, Composite Inspection, Bond Testing, Forgings and Castings, Power Generation (including EMATS) and general UT inspection.

    Read moreDone
  • MD-Series

    MD-Series

    Multi-Directional Magnetic Wet Benches for AC, HWDC or 1-Phase FWDC Magnetization

    The MD-Series multi-directional magnetic bench offers Alternating Current, Half Wave Direct Current and 1-phase Full Wave Direct Current for time-saving multidirectional magnetization which can find defects in all orientations with one mag-cycle.

    Read moreDone
  • Mentor UT

    Mentor UT

    Accurate and intuitive UT flaw detector system

    Mentor UT offers a new kind of inspection experience by combining outstanding UT performance, customizable workflow applications and user interfaces, and intuitive hardware with embedded expertise—making inspections more accessible and efficient.

    Read moreDone
  • Meters

    Meters

    For Magnetic Particle Inspection

    This line of mag particle testing meters will help you check and measure the performance of your magnetic bench, electromagnetic current generator or other magnetizing equipment as part of your regular system performance checks.

    Find out more about each of our mag particle testing meters by clicking on the tabs below, or contact us for help choosing the right field indicator for your application.

    Read moreDone
  • MFL-FS-A36-1-M

    MFL-FS-A36-1-M

    Read moreDone
  • MG-410

    MG-410

    Fluorescent Magnetic Particles

    MG-410 is an ultra-bright fluorescent magnetic particle powder for locating small, medium, and large discontinuities. These particles provide clear, ultra-bright, fluorescent green indications under UV light with minimal background. MG-410 is designed for use in water or oil baths for wet method fluorescent magnetic particle testing.

    Read moreDone
  • MG-450A

    MG-450A

    Fluorescent Magnetic Particle Premix

    MG-450A is a borax-free ultra-high fluorescence magnetic particle premix for locating small, medium and gross discontinuities in high-volume applications using wet method magnetic particle testing.

    Designed to mix with water, MG-450A improves indication visibility with less background fluorescence because of the high-strength, high-fluorescent MG-410 particles.

    Read moreDone
  • Microgage III, ultrasonic thickness gauge, portable thickness measurement, NDT equipment, non-destructive testing, ultrasonic testing, material thickness measurement, corrosion detection, industrial ultrasound, precision thickness gauge, wall thickness measurement, ultrasonic technology, portable NDT device, structural integrity assessment, ultrasonic inspection, metal thickness measurement, pipeline thickness testing, NDT for material evaluation, ultrasonic thickness testing, advanced thickness gauge.

    Microgage III

    All instruments in the Mocrogage III range are field upgradeable, allowing the operator to opt for further features further down the line, without returning the instrument to the factory.

    The variety of features offered by the Microgage III series allows the user to select a quality tool that will exceed their application needs. The Echo-to-Echo capability allows measurement of the thickness of materials without removing paint or coatings.

    Designed with the user in mind, the Microgage III utilises state- of-the-art digital technology to produce fast accurate readings. Available in 7 models including basic (B, datalogging (DL), with and without waveform (W) and with monochrome or colour (C) displays.

    Read moreDone
  • Modular Penetrant Testing Equipment

    Modular Penetrant Testing Equipment

    Magnaflux’s modular penetrant equipment design makes it simple and cost-effective to build the right equipment for every process, including water wash, lipophilic and hydrophilic LPI testing, while also conforming easily to fit the required work flow and available floor space with straight line, U-shaped and L-shaped designs.

    Read moreDone
  • Multi-element transducers / Transducers

    Multi-element transducers / Transducers

    Krautkramer ultrasonic probes and transducers.

    We manufacture a wide variety of multi-element ultrasonic probes and transducers with a high degree of reliability for numerous applications. Eliminate the need for multiple inspections with the focus and fixed-angle options available, and reduce setup and scanning times with our delay-line or immersion probes for large-area scanning.

    Read moreDone
  • MV-740

    MV-740

    Water-Based Visible Magnetic Particle Suspension

    A highly-sensitive water-based magnetic particle fluid for non-fluorescent (visible) wet method magnetic particle testing to locate fine and medium discontinuities on finished parts. MV-740 provides clear, strong indications due to the heavy buildup of the highly magnetic particles. The product is ready-to-use, so no dilution is required.

    MV-740 is often used with WCP-2 white contrast paint to improve contrast and inspection sensitivity.

    Read moreDone
  • NDT Light Meters

    NDT Light Meters

    The Visible Light Meter accurately measures visible light in both foot-candles per and lux and includes a permanently attached visible light sensor, specially designed to measure visible white light in the 400-760 nm range for non-destructive testing.

    Read moreDone
  • NiCr Test Panels

    NiCr Test Panels

    For Liquid Penetrant Testing NDT

    NiCr test pieces for liquid penetrant inspection will help you maintain your PT testing process by verifying penetrant sensitivity and performance. Use to check for penetrant deterioration, to compare different penetrants or to verify sensitivity or visibility. NiCr Test Panels are ideal penetrant sensitivity comparators. They come in pairs, with panel set crack depths available in 20 microns.

    Read moreDone
  • P-Series

    P-Series

    Economical Power Pack Magnetic Current Generators

    P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.

    Read moreDone