Non-Destructive Testing (NDT)
Showing 1–16 of 119 results
-
Category - Category
Dye Penetrant Testing (PT) (28)
- Category
Eddy Currents (ET)
-
CategoryIndustrial Radiography (RT) (16)
- Category
Magnetic Particle Testing (MT) (52)
- Category
MFL (Magnetic Flux Leakage) (1)
- Category
Ultrasound Testing (UT) (158)
-
CategoryVisual Inspection (VT) (3)
-
Black light meter
The UV-A meter is a compact, rugged, easy-to-operate digital radiometer for measuring and calibrating UV-A black light sources used in fluorescent penetrant testing and fluorescent magnetic particle inspections for non-destructive testing.
-
CD-Series
Power Pack Electromagnetic Current Generators with 3-Phase FWDC Magnetization
The CD-Series is our line of magnetic power packs for magnetic particle inspection. These stationary magnetizing current generators are power pack versions of our wet bench units to effectively magnetize parts while keeping power requirements to a minimum. CD-Series units are ideal for large parts which will not fit easily on a wet bench or for parts that require special handling.
-
Computed Radiography Cassettes (CR)
Waygate Technologies cassettes, formerly known as GE Inspection Technologies, are designed specifically for NDT applications. CR cassettes are lightweight and very easy to use. The synthetic material provides maximum rigidity for overall durability.
The higher radiation energies used in industrial X-ray make it impossible to use standard medical cassettes. Therefore, the cassettes can be supplied with integrated 200 μm (0.008″) copper (Cu) front screens and are always backed by 200 μm (0.008″) copper to ensure optimum protection against backscatter, resulting in optimal image quality.
-
DM5E (Thickness Gauge)
Compatible with our best-in-industry probes, DM5E corrosion thickness gauges represent the highest standard of accurate, easy-to-use thickness measurement.
Lightweight and ergonomically designed for everyday use, its intuitive interface and simple calibration give you measurements you can rely on, even in the harshest working environments.
-
DMS Go+ (Thickness Gauge)
The ultra-portable, ultra-powerful thickness gauge
Featuring intuitive, easy-to-use arrow-keypad control, powerful data management and the latest industrial electronics to provide accurate, reliable and comprehensive thickness inspection data. The Krautkrämer DMS Go+ thickness gauge that can be easily converted into a comprehensive flaw detector with a simple software upgrade
-
Echogel
Economical Ultrasonic Couplant
Echogel® 20 is an economical, basic-use couplant in medium-thick gel viscosity for ultrasonic inspections, like flaw detection/sizing and thickness gauging, where salt cake or metal corrosion salts are present. It provides good corrosion inhibition and resists viscosity breakdown on salt-caked boilers and other corroded materials.
Benefits
- Enhanced surface wetting to quickly cover oily or dirty surfaces
- Maintains viscosity on corrosion or salt cake
- Good corrosion inhibition
- Silicone free
- Hydrogen embrittlement testing
-
Equipment Adapters
For Magnetic Particle Inspection
Make sure your Magnaflux magnetic bench works with every part you need to inspect with this range of equipment adapters. From large, heavy parts to small pieces like bolts, screws, and pins, Magnaflux equipment adapters help you get more out of your magnetic bench by helping you make it work for a wide variety of parts.
-
EV6000
Hand-Held LED UV Lamp
The EV6000 LED UV lamp is a portable, hand-held UV lamp for fluorescent non-destructive testing applications like fluorescent penetrant testing and fluorescent magnetic particle inspections.
The EV6000 features a uniform beam with no hot-spots and a 9 in / 23 cm wide beam, 33% wider than the next widest hand-held UV lamp in the industry.
-
EV6500
High-Intensity, Dual-Light LED UV Lamp
The EV6500 is a hand-held, portable LED UV lamp with built-in white light LEDs for non-destructive testing applications like fluorescent penetrant testing and fluorescent magnetic particle inspections.
Designed with broad-beam profile for in-line and hand-held use, the EV6500 will decrease inspection time by improving indication visibility with 7,000 μW/cm2high intensity UV-A illumination and the widest coverage area in its class.
-
Flat Panel
Waygate Technologies’ Flat Panel is a leading industrial radiography solution that uses state-of-the-art technology to improve inspection quality and efficiency. With a wide range of benefits, key features and advantages, this flat panel has become a preferred choice for professionals worldwide.
-
K1C-1018
NO. 1 (K1) CALIBRATION BLOCK (WITH CIRCULAR REFLECTOR)
Used to calibrate ultrasonic flaw detection equipment both in laboratory and on-site conditions. Manufactured in accordance with EN 12223 and ISO 2400. The block includes a circular reflector.
Features:
- Dimensions: 3.937″ (H) X 11.811″ (L) X 0.984″ (W)
- Weight: 11.225 LBS
- Material: 1018 STEEL, NICKEL PLATED
- Specifications: EN 12223 & ISO 2400
-
Krautkrämer RotoArray Compact
The most portable phased-array ultrasound scanning solution with miniaturized electronic instruments that combine phased-array power at the probe.
-
Krautkrämer SpotVision
Phased Array Inspection of Spot Welds.
With the increase in vehicle production, the automotive industry is turning to image-based inspection to reduce downtime while maintaining high quality standards.
-
Krautkrämer USM 100 (Flaw Detector)
The new standard in flaw detection. Now also available with the industry-leading features of the Pro editionSleek but rugged, the Krautkrämer USM 100 is a portable, highly versatile flaw detector with smartphone-like capabilities. Designed ergonomically for unrivaled ease of use, it features a large touch screen and buttons that allow seamless ambidextrous operation. Digital features include a best-in-class user interface that streamlines setup, training time and updates.
-
L-10 Portable Magnetic Coil
For Magnetic Particle Inspection
The handy L-10 portable magnetic coil is great for field applications to magnetize a variety of part sizes and shapes for magnetic particle inspection. It is specifically designed to detect transverse defects in shafts, spindles and similar components.
The L-10 has a wear-resistant resin coating, and is supplied with a footswitch to energise the coil and 10 metres of flexible supply cable.
-
LEMO-00 to LEMO-1
Ultrasonic cable (UT) LEMO-00 to LEMO-1, High Tech Supplies brand.
Custom cable manufacturing and customization upon request.
Made in USA.